Got the TR6 installed. Set Steve's cam sensor static and then set it dynamically with the engine running with the function of the TR6. All seems good. Went for a drive. 8 miles later get the TR6 code 16 on the tach. Go home and change out Steve's sensor for my old cam sensor. Same procedure as before. Set it static and dynamically. All is well go for a drive. 8 miles later get the TR6 code 16 on the tach. Message Bob Bailey back and forth. Call in a favor to Rich for some voltage readings on his car. It appears that voltage readings vary enough that Bob says I need a oscilloscope and he could nail this down. The only thing I haven't done is pull the sensor wire out of the bundle and ring it out back to the module. I've even thought of rigging up a test wire from the sensor back to the module...
Also thought of selling the TR6.
On a side note, I'm not happy with Mr. Bison.