Author Topic: Oil return line  (Read 19133 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Oil return line
« Reply #15 on: January 30 2015, 01:12:47 PM »
thanks!
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Oil return line
« Reply #16 on: January 30 2015, 05:42:30 PM »
okay...added it...

http://www.vortexbuicks-etc.com/turbo_drain_hose.htm

You did a really nice job, Larry!
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Oil return line
« Reply #17 on: January 30 2015, 05:48:10 PM »
Awesome thanks Steve 😋 glad I can maybe help someone down the road.
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2170
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: Oil return line
« Reply #18 on: January 31 2015, 10:35:28 AM »
Looking real good. I spec'ed it out and came up with $118.87 shipped with American money. Upside ill have 2'10" of extra hose as it comes in 3' sections.

Nice Work!

Rich

"Goals without actions are just dreams."

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Oil return line
« Reply #19 on: January 31 2015, 12:12:08 PM »
I picked up all my parts at Lordco I get a decent discount but I'm sure all said and done I'm into for $100.00
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

Offline good2win22

  • Turbo Street Outlaw
  • *******
  • Posts: 2019
  • PSI: 0
  • No man lives happily lest he remove the boredom
    • View Profile
Re: Oil return line
« Reply #20 on: January 31 2015, 12:12:45 PM »
I like it! 
Jason

1966 Ford Ranch Wagon
1982 Jeep Wagoneer Limited
1986 Grand National BLK PHNX
1987 Turbo Regal Limited
2018 Ram 2500 Cummins

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5549
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Re: Oil return line
« Reply #21 on: January 31 2015, 01:49:43 PM »
Larry...thanks so much for the pics and part numbers. If I ever get in a jamb then my guy at the speed shop can bail me out. :)
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Oil return line
« Reply #22 on: February 06 2015, 04:27:18 AM »
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Oil return line
« Reply #23 on: February 06 2015, 12:20:29 PM »
After seeing the size of the -10 I would not go any smaller. I even ran a 1/2 drill thru the vibrant fitting because I thought it looked small.
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Oil return line
« Reply #24 on: February 06 2015, 03:28:03 PM »
Odd. -10 is 5/8".  A 1/2" drill shouldn't have made any chips.  -8 is supposed to 1/2".

I made mine out of -12 and dumped it straight into the pan but I can't recall the exact ID of those fittings.
« Last Edit: February 06 2015, 03:32:22 PM by earlbrown »
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Re: Oil return line
« Reply #25 on: February 06 2015, 05:54:55 PM »
It was just the Vibrant fitting it did not do much but did open it up a little, with the OD being 5/8 it brings the ID close to half inch with the wall of the hose plus the fitting being pressed into it, these things are mass produced who knows what happens with the tooling after they make a few thousand.


I was just being cautious I wanted to ensure there was no restrictions at the narrowest point, last thing I wanted was oil collecting and my turbo seals failing prematurely. 
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Re: Oil return line
« Reply #26 on: February 20 2015, 01:23:06 PM »
well that did not work as planned.......
Apparently Cottons has a repop available should have listened to Brad stock Junk always works best.
I installed my stock turbo to confirm the results.


So my question is how pouched is the turbo?
It still feels tight no oil on the inlet side there is a metal oil ring on the turbine side works like a piston ring from what I have researched  and all the locals say they will not touch a Turbonetics turbo.
A buddy is going to lend me his stock line for the week end.
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Oil return line
« Reply #27 on: February 20 2015, 01:37:17 PM »
lost me.  What did not work?  The oil return line?
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Oil return line
« Reply #28 on: February 20 2015, 01:45:00 PM »
That's my assumption at this point
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Oil return line
« Reply #29 on: February 20 2015, 02:15:12 PM »
I am borrowing a stock return line for the weekend and will let you know what happens.
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal