1
General Buick Tech / Re: Exhaust Valves
« on: August 24 2011, 10:28:47 AM »
Thank you.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
General Buick Tech / Exhaust Valves« on: August 24 2011, 12:23:48 AM »
Are there any stock replacement exhaust valves without the oil pushing ridge on the shaft. Looking to use valve seals, already had the guide machined.
Thanks. Rob. 3
Transmissions / Re: Torque Converter??« on: April 14 2011, 10:16:13 PM »
I think I figured it out. after putting the te44 on with Precision .63 the stock converter wont allow the turbo to spool up. thanks for all the input though.
4
Transmissions / Re: Torque Converter??« on: April 14 2011, 08:20:51 PM »
I brake torqued it in the driveway and it would only build about 3lbs of boost and I could hold the throttle to the floor and that is all it would do and the rpm's wouldn't go above 2600. Driving i can kick it and boost 23lbs.
5
Transmissions / Torque Converter??« on: April 14 2011, 04:37:47 PM »
I took the car out last evening and I noticed a whine coming from the transmission, only in gear and progresses with rpm. I brake torqued the car and it wouldnt do a burnout, but as soon as I let off the brake the car took off and lit up the tires. It would build boost on the brake but wouldnt break the tires loose. It is a stock D5 converter and a 200r4. Any help would be appreciated.
Rob.
Pages: [1]
|