Roller cam options

[good2win22]

Huh look what was just introduced .....
https://www.facebook.com/FullThrottleSpeed/photos/a.402243346478154.78544.112970375405454/984878924881257/?type=3

Now isn't that a cute little baby roller cam..... 

[Forzfed]

Now isn't that a cute little baby roller cam.....

That is a little one!

[larrym]

I found it interesting after the discussion on how much lift could be used on untouched heads that these would be introduced.

[good2win22]

I looked up the stock cam specs to compare to the new full throttle stock replacement roller cam  Here we go:

Stock cam:        Duration @ .050                        Lift at .050
                         intake        192                         intake    .384
                         exhaust      196                        exhaust  .408
                         lobe separation is 107 and overlap is 38

Roller 204:         intake        204                         intake    .440
                         exhaust      204                        exhaust  .440
                         lobe separation is 111 and could not find overlap

[larrym]

for a baby roller its still a good step up from stock nice post Jason

[Forzfed]

So are you going to be putting the Fetis cam in?