Show Posts
61
General Buick Tech / Power steering/hydroboost pressure line question.
« on: December 17 2010, 12:36:07 AM »
So I am in the middle of doing a hydroboost conversion to my T. I put the pressure lines on a little bit ago but it doesn't seem like the one on the gearbox went on hardly at all.
As you can see in this picture the driver side line is seated almost entirely into the booster. The passenger side has a couple threads left but it's tight as can be.
However in this picture, the line going to the gear box has around 3.5 threads left yet it's tight. I tried taking it out and putting in back in around three times and the same result each time. I don't want to have it leak the minute I throw everything back together.
Do you all think it's fine or should I try until it goes in further?
As you can see in this picture the driver side line is seated almost entirely into the booster. The passenger side has a couple threads left but it's tight as can be.
However in this picture, the line going to the gear box has around 3.5 threads left yet it's tight. I tried taking it out and putting in back in around three times and the same result each time. I don't want to have it leak the minute I throw everything back together.
Do you all think it's fine or should I try until it goes in further?
