Author Topic: Cam Selection Question (Read 2062 times)

Scoobum · « **on:** October 15 2011, 02:17:12 PM »

I have a customer in need of a new cam...but that's on a budget. I found a 204/224 cam. I'm wondering if this would work well with ported heads, 3200 convertor and a 66 turbo.

Steve Wood · « **Reply #1 on:** October 15 2011, 05:45:47 PM »

224 or 214?

the 204/214 flat tappet is liked by many

Scoobum · « **Reply #2 on:** October 15 2011, 08:45:33 PM »

Made by Schneider...20 4/224...with 110 LSA...450 in/450ex...max duration 280/300

Steve Wood · « **Reply #3 on:** October 15 2011, 10:20:12 PM »

I would like to say it would be fine, being on the exhaust side, but, I have never tried one that extreme. Probably would be better on a turbo with a lot of back pressure...Cha rlie is the cam guru on turbo theory...altho my experience says street cars don]t know the diff.

Scoobum · « **Reply #4 on:** October 15 2011, 10:29:00 PM »

Thanks Steve.

IHADAV8.com - Turbo Buick Tech, and Nonsense

News:

Author Topic: Cam Selection Question (Read 2062 times)

Scoobum

Cam Selection Question

Steve Wood

Re: Cam Selection Question

Scoobum

Re: Cam Selection Question

Steve Wood

Re: Cam Selection Question

Scoobum

Re: Cam Selection Question