31
General Buick Tech / Re: Front Brake Upgrade Suggestions Needed
« on: May 12 2014, 08:53:22 PM »Teaser pic for a 12" rotor on a blazer knuckle.looking good.
I went with the converted hubs because i did NOT want sealed bearings.
Unofficial Message Board Home of Steve Wood
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 31
General Buick Tech / Re: Front Brake Upgrade Suggestions Needed« on: May 12 2014, 08:53:22 PM »Teaser pic for a 12" rotor on a blazer knuckle.looking good. I went with the converted hubs because i did NOT want sealed bearings. 32
General Buick Tech / Re: Front Brake Upgrade Suggestions Needed« on: May 12 2014, 12:04:44 AM »Our cars currently have the hub assembly right? And can someone explain to me what that big bulge is in the center of the hub that goes through the center of our wheels? thanks The OE stuff the hub and rotor are one piece. On my LS1 upgrade my OE rotor becomes a hub because the friction part of it is cut off of it. 33
General Buick Tech / Dutt neck - worth it?« on: May 02 2014, 09:50:50 PM »Pix of this "$158" intercooler? Comes with piping and such? http://turbobuick.com/forums/threads/1968-chevelle-with-87-gn-engine.197799/page-19#post-3325534 34
General Buick Tech / Re: Dutt neck - worth it?« on: May 02 2014, 09:35:45 PM »
NO NO i didn't look at the price.
the one i got was about $125.00 shipped ID NEVER buy something that expensive 35
General Buick Tech / Re: My new 1986 GN T-Top build up.« on: April 30 2014, 10:18:53 PM »
Got the Volt booster today,
Cant wait to be done with this car 36
General Buick Tech / Re: Dutt neck - worth it?« on: April 30 2014, 10:14:03 PM »
i got one close to this but with 3" in/out lets
http://www.ebay.com/itm/CXRacing-Bar-Plate-Intercooler-Turbo-1-Side-24-X11-X3-2-5-Inlet-Outlet-/140629768087?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item20be2ff797 37
General Buick Tech / Re: Dutt neck - worth it?« on: April 29 2014, 12:51:35 AM »Im so ridiculous, as I'm sitting over here hoping someone try out that ebay kit!!! I really want to know how it works, and I've invested so much into my car over the last year, I can't take anymore chances. Lol. I won't buy another intercooler anyway until I get a turbo(leaky leaky oil). i just put and Ebay junk on my car, ill let you know how it goes. BTW i am also installing a Dutt-necked IC onto my Regal. 38
General Buick Tech / Re: e85 making the switch« on: April 04 2014, 10:09:15 PM »
save your money and go straight to 120s
or continue to use ALKY injection to make up the difference. E85 requires A LOT of fuel 39
General Buick Tech / Re: My new 1986 GN T-Top build up.« on: March 17 2014, 02:51:17 PM »lookin good! I agree With the GNX cluster. Although i do like the gauges on the A pilar. BTW none of them interior pictures are of my car. 40
General Buick Tech / Re: My new 1986 GN T-Top build up.« on: March 16 2014, 03:03:15 PM »We used the brake lathe at work to turn the hub down to the final OD when were building up my setup. Another option if the machine shop asks for too much money.thats the plan. I still need to figure out the hose situation. 41
General Buick Tech / Re: My new 1986 GN T-Top build up.« on: March 14 2014, 03:45:52 PM »Interesting approach to making hubs. How do you plan on turning down the OD?I am going to stop my cheapness and pay the machine shop to finish them off. Hopefully it will be a lot cheaper than the $50.00 Each that they asked for to do the complete job. The other one is done. And both spindles are done. Just need brake hose to go from G-Body to 02 F-Body If anyone has info on which hoses to use PLEASE post it up. Thanks David 42
General Buick Tech / Re: My new 1986 GN T-Top build up.« on: March 14 2014, 10:33:14 AM »
Froze my butt off today but got somethings done.
I drilled and tapped the holes for the F-body brackets on one spindle. I managed to cut the friction section on one rotor and got about half way on the other one before my ONE day old $14.00 angle grinder took a shit, Drove to Harbor Junk and got a replacement. the discs aren't as bad as i thought they would be only used one disc And yes first i started drilling it but then i smartened up a little bit.lol 43
General Buick Tech / Re: My new 1986 GN T-Top build up.« on: March 06 2014, 06:28:22 PM »
ill get the dimensions for you tomorrow
44
General Buick Tech / Re: GBODY PARTS....« on: March 05 2014, 10:13:13 PM »Much of his new stuff comes out via goodmark, might want to check there.thanks 45
General Buick Tech / Re: GBODY PARTS....« on: March 05 2014, 09:41:49 AM »
I need to order some T-Top stuff that i think he only has. might have to hire a local member to pick the stuff up then ship it out to me.
Is he close to I95? |