Messages

61

IHADAV8 Playground / TR6 problems

« on: August 21 2018, 03:49:31 PM »

Hmm according to Bob that is the power to the coils just thought might be to much voltage.
I have checked all the coils and wires to the coils everything looks good.
The only thing I have changed is the power source to the module.


Sent from my iPhone using Tapatalk Pro

62

IHADAV8 Playground / TR6 problems

« on: August 21 2018, 03:03:13 PM »

It was eating coils and now it won’t spin past 4000 rpm. So I’m still having issues but think I found the problem. I sent the box to Bob he figures it’s repairable.
My question is this appears to be a voltage problem my logs show 13 to 14.5 volts.
The power source for the module is a separate panel hot wired to the alternator I’m borrowing a stock module and coil should I wire a ballast resistor in line to be safe?


Sent from my iPhone using Tapatalk Pro

63

IHADAV8 Playground / I think I have a problem was looking for parts and found this....

« on: August 16 2018, 09:56:38 PM »

Look what showed up today


Sent from my iPhone using Tapatalk Pro

64

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 14 2018, 12:09:20 AM »

Been there ! Time for an anti roll bar 

Yes sir that’s on my laundry list had one on the Ttype irked like a hot damn.



Sent from my iPhone using Tapatalk Pro

65

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 13 2018, 03:17:37 PM »

Great pic!  Loving the IROC rear wheels.

They are the perfect offset 7” wide 4.5” BS 
I need 4 more  for my street tires

Not bad for 26” 8.5 slick 😃


Sent from my iPhone using Tapatalk Pro

66

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 12 2018, 11:47:12 PM »

Well I have to admit I am pretty smitten with this little car




Sent from my iPhone using Tapatalk Pro

67

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 12 2018, 09:46:19 AM »

https://youtu.be/pAC-ggozgvQ




Sent from my iPhone using Tapatalk Pro

68

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 11 2018, 07:27:15 PM »

I’m stoked just ran a 6.95 at 98mph
That’s my 10 second pass!!!


Sent from my iPhone using Tapatalk Pro

69

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 11 2018, 01:25:00 PM »

Chris ran a 7.16 they told him to slow down 😂


Sent from my iPhone using Tapatalk Pro

70

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 11 2018, 01:23:26 PM »

First pass ran a 7.40 at 77mph had to lift saw some knock gonna add some fuel hopefully run it out.


Sent from my iPhone using Tapatalk Pro

71

IHADAV8 Playground / Thunder in the Valley 2018

« on: August 10 2018, 10:07:26 PM »

Made thru tech how is this for a pit location!


Sent from my iPhone using Tapatalk Pro

72

IHADAV8 Playground / I think I have a problem was looking for parts and found this....

« on: August 08 2018, 11:53:56 PM »

Fresh from the fab shop had a rear kmember built and tied into the suspension feels solid races this weekend

73

General Buick Tech / Spark Plugs?

« on: August 07 2018, 11:55:33 PM »

Another good question why would a cooler plug be needed.
“Conversely, a cold spark plug has a shorter insulator nose and absorbs more combustion chamber heat. ... A colder heat range is necessary when the engine is modified for performance, subjected to heavy loads, or is run at high rpms for a significant period of time.”

How effective would they be on a 3.8?




Sent from my iPhone using Tapatalk Pro

74

General Buick Tech / Spark Plugs?

« on: August 07 2018, 11:27:46 PM »

Ok let’s see where this leads UR5 or YR5 NKG


Sent from my iPhone using Tapatalk Pro

75

General Buick Tech / Alky Kit ordered

« on: August 06 2018, 11:31:37 AM »

I have a 10$ stethoscope with vacuum line attaches great for exhaust and vacuum leaks


Sent from my iPhone using Tapatalk Pro