Messages

31

General Buick Tech / Re: starts an dies

« on: October 10 2016, 04:07:18 PM »

when the maf is unplugged an it does run   fuel pressure is at 42 line off.
 when it is running   the idle is around 1800?
 regardless of throttle plate stop location

32

General Buick Tech / Re: starts an dies

« on: October 10 2016, 04:04:51 PM »

earl what is the  koef  test?    i did try key on engine off an af was at 4   then full  throttle still 4  is this what you mean?
      no translator  stock maf


old buzzard your are correct  not wired up   the canister isn't there or the electrical gizmo on top   i didn't plug the lines there still sitting here open ended.
 

33

General Buick Tech / Re: starts an dies

« on: October 10 2016, 12:10:41 PM »

well so much for the excitement....
changed out the maf with my spare..    same problem   starts an dies..  unplug maf   fires right up???

34

General Buick Tech / Re: starts an dies

« on: October 10 2016, 10:52:39 AM »

brad  yes   spark an ink pulse
dave im not sure i thought that may be the problem..
i unplugged the maf an the car  fired up an ran no problem.  strange to  me but hopefully its all it was,,,,  ill post back with an update...
saturdays is race day if we can get the car off the stands....

35

General Buick Tech / Re: starts an dies

« on: October 10 2016, 09:51:00 AM »

Earl  yes it fires an then dies every time,


texas  yes can hear fuel pump when key is turned on   i believe the gauge reads 20   then with another turn of the key it hits 38


I'm  curious if one of the removed items maybe be causing   this? 

36

General Buick Tech / Re: starts an dies

« on: October 09 2016, 08:02:30 PM »

yes thanks   brad I've been on the site tried what he has written  nothing thus far..

37

General Buick Tech / starts an dies

« on: October 09 2016, 06:39:29 PM »

ok so we got the new motor in  still a 109, 
wired it up
go to start it an it fires after a bit of cranking an dies immediately ??


heres whats been hacked out of it
ac ,   heater box, wiper motor,   cruise control, charcoal canister,   power master.   an the temp  sensor on the top of the intake it   broke off  so   not wired up..  think thats all i see missing..


so far we tried a  new battery,   coil pack an module, crank sensor.    added   a ground from block to frame,  cleaned an tightend  grounds at back of head. 
all the sensor reading look ok   i mean for just key on type stuff.   
any ideas
thanks guys

38

General Buick Tech / fuel line?

« on: October 07 2016, 01:48:26 PM »

ok on the t  we've been messing with someone removed sections of the fuel line an line to the charcoal canister.
i have the line from the filter ran to the fuel rail now I'm trying to run the line from the regulator to tank ,  now the tank is  still installed an just before the motor on the passenger side are 2 lines one is 5/16   an the other is  1/4,  will it matter if i just tie into the 5/16 line?  considering thats what it is coming from the engine?
thanks

39

For Sale/Trade/Want To Buy / Re: wtb

« on: August 28 2016, 05:06:57 PM »

any pics of this item?
how much?
thanks

40

For Sale/Trade/Want To Buy / Re: wtb

« on: July 30 2016, 10:54:05 AM »

still  looking for this item anyone have any leads??

41

For Sale/Trade/Want To Buy / Re: wtb

« on: April 22 2016, 09:54:07 PM »

hi tb3   i only need the part shown have    the the rest  if you wanna separate  shoot me a line
dave   stop being a post whore

42

For Sale/Trade/Want To Buy / wtb

« on: April 22 2016, 02:08:49 PM »

looking to buy this plastic piece that the ecm holder mates too

43

General Buick Tech / Re: windows dont work??

« on: April 16 2016, 05:49:38 PM »

never thought of taking pics   i could  take pics of the cleaned up version ,   

44

General Buick Tech / Re: windows dont work??

« on: April 16 2016, 08:15:43 AM »

Thanks Dave  good thread
i tore my motor  apart last night cleaned  the   brushes actually   cleaned it all     put it back together an  t works..
there was so much grease an oil around the   brushes an on the shaft the   brushes  ride on.
thanks for the help
Dave

45

General Buick Tech / Re: windows dont work??

« on: April 15 2016, 07:54:30 PM »

ok   using a test light   i have power to the switch..    i also have power going to the motor both sides when   switch is applied in that direction.
took out the motor applied power to the connectors   an nothing happens ?
question though why would both be bad?
what am i missing