Author Topic: injector swap  (Read 1085 times)

0 Members and 1 Guest are viewing this topic.

Offline TexasT

  • Legend in my own mind
  • Turbo Street Eliminator
  • ******
  • Posts: 1892
  • PSI: 1
  • So, This black car is fast?
    • View Profile
injector swap
« on: November 11 2014, 10:15:50 AM »
Well, car was idling like crap. I bought some new to me 42lb injectors and a matching tt chip. It is the 5.6 version so we will be learning some tuning. Should be fun.

Stock injectors



This one had some wear.



Old chip. Kenny Duttweiler special



We also replaced a bunch of old vacuum lines. I hope that helps with our low boost on the gauge.

Idled much better but then the water pump started pissin out the hole. So now we need to do a swap Out that. Never ending.
« Last Edit: November 11 2014, 10:44:12 AM by TexasT »
Rich

"Goals without actions are just dreams."

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2500
  • PSI: -2
    • View Profile
Re: injector swap
« Reply #1 on: November 17 2014, 12:10:07 PM »
It should run a lot better now.
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 flat tappet cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm PTE Throttle Body, RJC 325 Megacooler, TurboTweak chip, Alky Control w/M1 methanol, 25 psig on the street, stock crank, rods, and block.


Chris

Offline TexasT

  • Legend in my own mind
  • Turbo Street Eliminator
  • ******
  • Posts: 1892
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: injector swap
« Reply #2 on: September 10 2018, 06:55:36 AM »
It is also almost four yrs old
Rich

"Goals without actions are just dreams."


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo