Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - reality

Pages: [1] 2 3 ... 29
General Buick Tech / Re: Donut between downpipe and elbow
« on: February 15 2020, 06:29:13 PM »
If I said shim the flange would that help? The pipe under the gasket is ''stretched''.

General Buick Tech / Re: TPS Adjustment
« on: February 15 2020, 05:56:48 PM »
A couple things there that would bug me
MAF seems low
BL is high
What are the IAC in gear.
May be just me tho.

General Buick Tech / Re: Donut between downpipe and elbow
« on: February 15 2020, 05:48:03 PM »
THE pipe is fubared. You might try hammering the flange closed or put a sleeve in.

IHADAV8 Playground / Re: I laughed
« on: February 04 2020, 10:02:46 PM »
No photo description available.

IHADAV8 Playground / Re: The Bullitt goes to Auction today!
« on: February 03 2020, 09:47:06 AM »
A REIT is a good place for a laundry.

General Buick Tech / Re: oil question
« on: February 02 2020, 09:41:39 AM »
It will lower your temp 10 degrees. Actually seen on 2 tb's

IHADAV8 Playground / mhm
« on: February 01 2020, 02:51:15 PM »
Also, as I mentioned in the other thread [/size]@moparjim[/color][/size] - the Turbo Buick world needed classes and rules to deal with the requirement to standardize the record runs because all Turbo Buick owners are notorious liars and cheats (and it took years for them to get on the same page). I think that's why we enjoy each other's company, my tur-bro.[/color]

I never got a recall either but while I was at the dealer I asked about it and they changed it. Bastages spilled brake fluid all down the fender too.
1988 time frame tho.
Actually never got ANY recalls

While car recalls don't have an expiration date, they are only enforced for "reasonable periods," the agency says. Basically, a recall is over if a vehicle's manufacturer goes out of business, or if the parts needed to make the necessary repair are no longer being made.[/color]Jun 5, 2013

A recall never expires. Go
to GM and they will change it.

IHADAV8 Playground / Re: Building A Garage
« on: January 11 2020, 04:51:24 PM »
Make an access through the garage. Or better yet, cut the part of the deck off and make the garage even bigger. with a through access.

How warm do you want the garage to be? Anything above 60f is just a waste.IMO

IHADAV8 Playground / Re: Building A Garage
« on: January 09 2020, 09:53:55 PM »
But on a serious note nothing beats the heat from a wood stove.
maybe a pellet stove would work.

IHADAV8 Playground / Re: Building A Garage
« on: January 09 2020, 09:48:28 PM »

No, it is not one of the laws of thermodynamics!!!!!!!!!

Also, it is properly referred to as the Stack Effect, but, it's still not one of the Laws of Thermodynamics .

Ron, you have me thinking.  If you dig a 40 ft hole in the floor under a radiant heater that is 40 ft above the floor, when you open the cover to the hole, does the air in the building all pour into the hole while the hot air around the heater rises up and goes to the top of the building?  Subsequently, does this result in a vacuum at floor level so all the workers die of oxygen deprivation?

IDK Steve ,seems like the air in the ground is warmer than the air above and the air near the roof is warmer than both of those so probably create a sideways tornado

Pages: [1] 2 3 ... 29