IHADAV8.com - Turbo Buick Tech, and Nonsense
General => IHADAV8 Playground => Topic started by: Dragonational on April 27 2006, 11:43:26 PM
-
Well i found a way to get on this site finally. Im still overseas but i should be home \"soon\" cant say when. I got a new motor being delivered for the GN and i cant wait to get back. Damn i missed you guys, whats new? Harry
-
We're all going to Vegas this weekend. Glad to hear from you.
Who did you get your engine from ? If you have a high speed
connection, you'll have to download the video from the last trip.
http://turbobuicks.net/movies/usersubmitted/Robert/HitAndRun-NWS-.wmv
Right click this link, and "save as". That'll save on Joes bandwidth
by not having to download it every time somebody watches it.
Enjoy. :atbeer:
-
Yeah, what new engine? What did you do to it?
-
Well i cant load the picture but here is the write up.
Engine build:
Block was bored .030 and line bored. Rotating assembly balanced to 2 grams.
Heads rebuilt with a 3 angle valve job done on them. Heads were o-ringed
with matching head gaskets.Poston Enterprises high performance rebuild kit.
Part #PE394463. Kit included high performance forged pistons, street-strip
moly rings, hi-rev lifters, high performance valve springs, high performance
cam bearings, high performance double roller timing set, full engine gasket
set, high volume oil pump, and a high performance camshaft. Poston\'s GN110T camshaft.
Engine extras:
42.5# injectors, RJC Racing power plate, Bowling Green Customs valve covers
(no longer available), Billet aluminum waterneck housing, 160 degree thermostat,
billet alum. underdrive crank pulley with correct size belt, throttle body and plenum
ported to 62mm, adjustable fuel pressure reglator, all new sensors (except cam sensor),
I put a drain cock in the drivers side of the block if you ever need to
drain coolant, the block, heads, intake, and various other parts are painted
with a high quality ceramic engine enamel, everything else is painted with
varying high quality paint. Everything should cure the first time you run it.
It all comes together to make the engine just plain awesome to look at. I believed that is everything
So it should be nice. Harry
-
Sweet! I should race to your house and put it in for you.
-
I will expect you there on monday. I will be going to florida in may after i get back and me and my father in law are going to pull the old one and drop in the new one. This thing should scream. I think. Have a blast in Vegas man. wish i could be there but....... im kinda stuck here for now.
-
Harry,
Good to hear from you ,hope you're getting a tan
-
Try to post a pic of your engine. The board limits pics to 800 x 600 pixels
or smaller.
I went beyond tan to red this weekend. :redfaced; ...but to drunk to feel it. :atbeer:
:atbeer: :atbeer: :atbeer: :atbeer: :atbeer: :atbeer: :atbeer: :atbeer: :atbeer: (insert Jager smiles here)
-
:rofl; RR's forehead was red as hell! :rofl;
-
:rofl; RR's forehead was red as hell!
-
Dare I say Lobstah Red?
-
Shit, a man your size you can say anything you want! I aint gonna argue. Did I tell you that you broke a couple of my fingers when you shook my hand? Wait....I was afraid to...lol
-
Dare I say Lobstah Red?
Lobster Heads....the British are coming, the British are coming!
Glad to see you postin' here, Harry. Welcome back to the fold.
-
i have a farmers tan from hell. Thats what happens when you the boss i guess. All in all i had a great time, if thats possible in 120+ degrees. I will see what i can do about pictures. So i take it Vegas was a blast then. Did any one go to BG this year?
-
You the boss?!?!?! Lazy fuck lol, dont you know they have shovels that stand up by themselves nowadays?
-
Vegas was a rip roaring time (except for Sylvan gettin' a flat on the strip)
But we made up for that in drinking, so its all just a fuzzy haze now. :rolleyes: :atbeer:
-
Yeah, who drives down Las Vegas Blvd on a flat? Sylvan.