IHADAV8.com - Turbo Buick Tech, and Nonsense

Tech Area => General Buick Tech => Topic started by: TurboCajun on December 07 2014, 02:04:37 PM

Title: Data Log ATTN STEVE
Post by: TurboCajun on December 07 2014, 02:04:37 PM: I dont see anything wrong maybe I am missing something
Title: Re: Data Log ATTN STEVE
Post by: Steve Wood on December 07 2014, 05:15:02 PM: me, neither
Title: Re: Data Log ATTN STEVE
Post by: Scoobum on December 07 2014, 07:49:43 PM: 02's are at 741 in high gear at 91 mph and 5500 RPM. If I was gonna push it any harder in high gear I'd throw fuel at it.
Title: Data Log ATTN STEVE
Post by: Steve Wood on December 07 2014, 08:02:24 PM: He discovered the fpr would not hold pressure but he was trying to find out why it would not make boost. Turns out his new dp will not seal
Title: Re: Data Log ATTN STEVE
Post by: TurboCajun on December 07 2014, 09:53:25 PM: what a rough weekend , it started Friday midday making the plate to go between the turbo and down pipe, thinking that was the problem. did not figure out the problem till late this afternoon , i think that I put Steve's brain to the test and had him stressed as much as me. Thanks so much Steve. now I hope that I don't have any issue with RJC making this good. well at least we know it's not the engine causing the problem
Title: Re: Data Log ATTN STEVE
Post by: TurboCajun on December 07 2014, 09:56:04 PM: here are some pictures, one is a thin plate that i made without the wastegate hole that you can see where the puck is sealing and where it is not.