IHADAV8.com - Turbo Buick Tech, and Nonsense
General => IHADAV8 Playground => Topic started by: Steve Wood on March 28 2014, 11:25:31 PM
-
Damn, that looks a bit wide
-
I assume you have a hammer, yes?
-
may take more than a five pound hammer
-
Sounds like an excuse to get a bigger hammer.
-
I could use a long handled 8# hammer....and someone that could swing it a lot
-
Don't be afraid :rock:
-
afraid...afrai d is what I get After I ruin something! In theory, this should fit, barely...
-
put a tire on it first :sw:
-
I prefer to mount the tire after the wheel is on the car-saves a lot of time when you have a flat if you don't have to get the lug wrench out
-
I prefer to mount the tire after the wheel is on the car-saves a lot of time when you have a flat if you don't have to get the lug wrench out
thats understandable :rock:
-
I'm thinking SCCA flares would work wonders here. :rock:
-
not in my budget...:D
-
Not nearly wide enough, IMO.
-
17x9. I just noticed that it has more clearance on this side than it does on the drivers
Steve
-
Period correct> shackles and wheel spacers :)
-
Nope.... Hotchkiss suspension which lowers the car. Had air shocks on it when I started, tho
Steve