IHADAV8.com - Turbo Buick Tech, and Nonsense

General => For Sale/Trade/Want To Buy => Topic started by: tb3 on July 23 2013, 09:36:18 PM

Title: aluminum adj fuel pressure reg and alum vacuum block
Post by: tb3 on July 23 2013, 09:36:18 PM
this fuel pressure regulator is perfect and is direct bolt-on to 84-87 fuel rail
sells new for $115
$65 shipped to the lower 48

Aluminum vac block for the 86/87 tr's.
perfect. comes with hardware.
sells new for $40
$25 shipped to the lower 48

 
Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: Steve Wood on July 24 2013, 09:36:13 AM
You have a better parts inventory than most vendors.....
Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: SuperSix on July 24 2013, 10:12:09 AM
Haha! I will be doing the same once/if I ever get my heap together.
Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: phil_long on July 24 2013, 12:09:32 PM
let me get that vacuum block

Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: tb3 on July 24 2013, 02:52:50 PM
lol!  in the past few years I've went from 3 turbobuicks down to 1.
I did nothing but bitch about not having the time for much anything else, so it just seemed to make the most sense to sell the 2.
which is not like me to start trying to make sense.
but nevetheless... . its nice having room to spare in the garage.
I was thinking a few months ago I would go after my second dream car (1970 orbit orange gto judge), but knowing me I wouldnt be able to leave it alone. 
and being so much into motorcycles too.... I'll just focus/tinker/enjoy my 87 gn and not buy anymore cars.

all I got left (yeah right) on my 87 is turbo, converter and alky.  I'll start on that in a couple months when it cools off.
Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: tb3 on July 24 2013, 02:53:25 PM
vacuum block and regulator are sold
Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: phil_long on July 24 2013, 03:55:45 PM
When you start doing those mods, I wanna help out so I can get some first hand experience with the turbo swap and alky install.
Title: Re: aluminum adj fuel pressure reg and alum vacuum block
Post by: tb3 on July 25 2013, 08:39:17 PM
I will wait till winter to do the turbo.  I need to pull the trans at the same time to put in the matching converter.
alky is relatively easy or more difficult, depending on who's kit your installing.
Turbo is usually fairly easy depending on what all is in your way (intercooler pipes, intake pipes, what downpipe, etc...
 
SimplePortal 2.3.7 © 2008-2025, SimplePortal