IHADAV8.com - Turbo Buick Tech, and Nonsense

General => For Sale/Trade/Want To Buy => Topic started by: tb3 on July 15 2013, 11:00:07 PM

Title: RJC power plate plenum for stock plenum $45
Post by: tb3 on July 15 2013, 11:00:07 PM: perfect condition.
$45 shipped to the lower 48.
Title: Re: RJC power plate plenum for stock plenum $45
Post by: phil_long on July 16 2013, 10:17:51 AM: how much are those normally?
Title: Re: RJC power plate plenum for stock plenum $45
Post by: phil_long on July 16 2013, 10:18:57 AM: I dont think you are far from me.
Title: Re: RJC power plate plenum for stock plenum $45
Post by: tb3 on July 16 2013, 10:26:02 AM: rjc has them on their site right now for $65 plus shipping.
theres not anything that can "wear" on this, so its litterally same as new.

I am in Wentzville, Mo.
meet me tonight at hooters in st. peters if you want.
whare are you located?
Title: Re: RJC power plate plenum for stock plenum $45
Post by: SuperSix on July 16 2013, 11:41:56 AM: One thing you will need is the plenum gaskets. I have had them on all of my TRs, and while controversial to some, I saw an immediate improvement, and the concept makes complete sens to me.
Title: Re: RJC power plate plenum for stock plenum $45
Post by: phil_long on July 16 2013, 12:57:37 PM: Good deal. I can order some gaskets. About to put the car in the shop to get the weatherstrippi ng stuff done. Im located in Florissant. Hooters is nice. How much for the spacer since shipping won't be required?
Title: Re: RJC power plate plenum for stock plenum $45
Post by: tb3 on July 16 2013, 01:10:08 PM: heck, how about $40. I'm sure it would've cost $5 or so to have shipped it.
are you in the market for any other parts?

I'm going to slowly thin out a few of my spares
How about a LT1 maf for $30?
Title: Re: RJC power plate plenum for stock plenum $45
Post by: tb3 on July 16 2013, 01:12:03 PM: and how come your so close and don't go to the buick meets? or do you and I just don't know it, lol!
I missed the one sunday. didn't mean to. I've been in a rush to get my mc back on the road.
Title: Re: RJC power plate plenum for stock plenum $45
Post by: phil_long on July 16 2013, 01:57:31 PM: I just dont know about them!! Lol. The only other parts I'm on the market for now are suspension parts. What year is your MC? I have the MAF that I bought from Earl. Thanks though. What time do you plan to be at Hooters? Maybe I can buy you a beer or something. Let me know. :cheers:
Title: Re: RJC power plate plenum for stock plenum $45
Post by: SuperSix on July 16 2013, 02:24:46 PM: FYI
http://www.amazon.com/ACDelco-24502089-Plenum-Manifoldold-Asbestos/dp/B0049Z8ZOK (http://www.amazon.com/ACDelco-24502089-Plenum-Manifoldold-Asbestos/dp/B0049Z8ZOK)

Glen is cheaper before shipping though.
http://www.nos4gn.com/servlet/the-232/Buick-Grand-National-GNX/Detail (http://www.nos4gn.com/servlet/the-232/Buick-Grand-National-GNX/Detail)

You will need 2pcs
Title: Re: RJC power plate plenum for stock plenum $45
Post by: phil_long on July 16 2013, 02:26:27 PM: 2 pcs? I've never seen how this work. Does one go on the plenum and one on the powerplate itself?
Title: Re: RJC power plate plenum for stock plenum $45
Post by: tb3 on July 16 2013, 02:45:11 PM: its just sandwiched inbetween the two. I cant remember if this one has a hole drilled for the egr, if you are running a tt chip, your egr is disabled anyway, otherwise, drill a hole.

phil, I have a perfect condition 34mm hollow front swaybar I'd get rid of.
I forget what select fbodys they came on. apperantly most fbodys got the 36mm bar, and I often see them rub the frame on our gbodys.
I run the 34 so it dont

I'll be at hooters around 7.
I'll pm you my number. just call or text when u get there.
my gn has expired plates so I wont be driving it. should be all up to date by next week