IHADAV8.com - Turbo Buick Tech, and Nonsense
Tech Area => General Buick Tech => Topic started by: gordyzx9r on April 01 2009, 10:27:53 AM
-
Just curious how people are powering their accessories.
I have the following that need power:
SMC Alcohol Control
Scanmaster
Tachometer
Casper's Audible Knock Alarm
I just realized that I have one of them plugged into a battery port and it must be causing a constant drain so I need to change that today.
As far as the IGN ports, is it alright to splice two accessories into one port?
-
The scanmaster and audible knock just get ign power (very little draw)
As for the SMC kit you'll want to be a little more creative and set up a relay
for your pump. (probably included in the kit w/ directions)
-
Yup. I have an ANS knock alert and my Scanmaster hooked up to the IGN ports on the fuse box. I wouldn't splice two into one.
-
all the ign ports share a common fuse so it really does not make any difference.
-
The scanmaster and audible knock just get ign power (very little draw)
As for the SMC kit you'll want to be a little more creative and set up a relay
for your pump. (probably included in the kit w/ directions)
I have a first generation (the non-progressive) SMC kit. It was installed years ago and I don't think there is a relay, I think it's just getting it's power from the fuse box. IDK for sure, I didn't install it.
As for the battery ports, if something is wired into a battery port will it cause a constant drain even with the key off?
-
As for the battery ports, if something is wired into a battery port will it cause a constant drain even with the key off?
It should not as long as it does not draw any current while the device is off.