IHADAV8.com - Turbo Buick Tech, and Nonsense

General => IHADAV8 Playground => Topic started by: blown1 on July 07 2007, 03:16:37 PM

Title: Be4u, Robert
Post by: blown1 on July 07 2007, 03:16:37 PM: do you know a guy goes by CUTT, on turbo buick.com. ( names Chris Sceau, in Now Orleans)
he has some atr headers for sale, reasonable,
he seems like good guy, just wanted to make sure. before I send $$
thanks
cruzn57
Title: Re: Be4u, Robert
Post by: kma697 on July 07 2007, 11:00:46 PM: I and a few friends of mine know Cutt. You shouldn't have any problems dealing with him. If you do just lemme know and I'll contact him!! :atbeer:
Title: Be4u, Robert
Post by: Be4u on July 09 2007, 12:53:24 AM: Thanks Kris, I dont know him.

Good luck Lee!
Title: Re: Be4u, Robert
Post by: kma697 on July 10 2007, 07:36:01 PM: He's got a GN thats in the 10's!!! He wanted to do some work on my tta but I wasn't too keen on leaving my car in his front yard.(this was after katrina and the police were a little thin at that time and I don't have an alarm) :psix;
Title: Re: Be4u, Robert
Post by: blown1 on July 12 2007, 10:34:47 PM: thanks !!
bought some headers from him
seems like good guy.
pickin up motor from zimmerman sat, should make close to 1000HP
yea 1000HP this thing is an animal, its got everything,
and it cost that much too !

later gang

thanks
and robert, email me!
Title: Re: Be4u, Robert
Post by: Recklessrob on July 12 2007, 11:40:10 PM: Tell us more. :pics:
Title: Be4u, Robert
Post by: Be4u on July 13 2007, 12:42:34 AM: Yeah man, No doubt, I wanna hear details!!!!

I sent you a PM Lee
Title: Re: Be4u, Robert
Post by: blown1 on July 13 2007, 11:54:36 PM: robert , send it to cruzn57@yahoo.com

motor is stroker, with girdle, and caps, M&A heads, ported to flow a ton!
new champion intake, new 70mm TB, solid roller 236@50 , 600 lift, zimmerman did everything possible to it, no turbo yet, but looking at borg warner 45-80, capable of 1250 hp , using NOS to spool it, , car weighs right at 3000lbs,
hoping for stupid times......... . you know what I'm talking about,,
Mike Zimmerman says should make 1000hp, so we will see??
he the guy who built Kerneys 8 sec 109 block, so maybe mine could be 2nd 109 in the quick times???
no comments to the other boards, as there is someone that needs a surprise!

I'll keep ya posted.
Title: Re: Be4u, Robert
Post by: Recklessrob on July 14 2007, 12:12:07 AM: I wasn't aware of anyone getting a 109 into the 8's.
I always wondered what the fastest 109 was.
Title: Be4u, Robert
Post by: Be4u on July 14 2007, 03:21:24 AM: Sent the email!

I remember Len being all excited about Kerneys car. I pretty excited about the guys that own the record for the fastest v6 built my engine and tranny. Y'all arnt playin' in the west!

Heres the link to the vid of the run http://www.youtube.com/watch?v=djN94DHkAsA
Title: Be4u, Robert
Post by: Top Speed on July 14 2007, 11:33:19 AM: Rob! Where have you been!??
Title: Be4u, Robert
Post by: Be4u on July 14 2007, 01:25:10 PM: I'll take the first guess....In the Black Hole he calls Derry.
Title: Re: Be4u, Robert
Post by: Recklessrob on July 16 2007, 12:29:47 AM: Went racing this weekend. We took 1st both days.

As for that vid, I believe that cah had a stage II block, and
Kenny Duttweiler has gotten a Buick V6 into the high 6's, but it wasn't
with a GN body. I'm curious what the record is for a production 109 block.
Title: Be4u, Robert
Post by: Be4u on July 16 2007, 03:12:47 AM: Didnt mean to confuse you RR, that vid is the fastest buick, not Kerneys car.
Title: Be4u, Robert
Post by: Top Speed on July 16 2007, 09:54:08 AM: http://arizonagn.net/Media/RecordPass.wmv

Dick Kerney's 109 block record pass....
Title: Be4u, Robert
Post by: Recklessrob on July 16 2007, 12:42:34 PM: Quote from: "Top Speed @ Mon Jul 16, 2007 8:54 am"
http://arizonagn.net/Media/RecordPass.wmv

Dick Kerney's 109 block record pass....

That answers my question. :supz: