Author Topic: Alky Tank Leak?  (Read 3214 times)

0 Members and 1 Guest are viewing this topic.

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1337
  • PSI: 5
  • Boost n00b
    • View Profile
Alky Tank Leak?
« on: August 10 2018, 03:01:47 PM »
So, I have 3/4 of the kit installed and I am going to get a buddy to finish it off.  Working nights so I can't spend much time on it.  I put a little methanol in the tank and noticed it is leaking right where the braided line connects to it.  Can you tighten that line?

Offline aminga

  • Chicks Dig the Power Bulge
  • Turbo Street Limited
  • ***
  • Posts: 151
  • PSI: 0
  • Chicks Dig the Power Bulge
    • View Profile
Re: Alky Tank Leak?
« Reply #1 on: August 10 2018, 04:05:38 PM »
I think that is a pressed in fitting and can't be tightened.
I had to get a new tank one time because of it
86 Regal T-type. One Owner. Twisted 6 Racing Built 109, FTSS Revolution X 206/210 Cam, T&D 1.65 Rockers, Diamond Forged Pistons, RJC Power Plate, TA6262DBB, PTE SLIC, Alkycontrol pump and Kit and ISAC Controller, Bailey TR6 Wastespark, TA Headers, ATR Downpipe, Racetronix Walbro pump and hot wire ki

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1337
  • PSI: 5
  • Boost n00b
    • View Profile
Re: Alky Tank Leak?
« Reply #2 on: August 10 2018, 04:27:48 PM »
Ah, crap! :(

Offline phil_long

  • F47
  • Turbo Street Eliminator
  • ******
  • Posts: 1540
  • PSI: 0
  • ...far from avg
    • View Profile
Re: Alky Tank Leak?
« Reply #3 on: August 10 2018, 05:13:22 PM »
During the install Razor suggests using water just in case an occurrence like this happens...less corrosive spill. Good luck with the install and hopefully that works out. :rock:

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1337
  • PSI: 5
  • Boost n00b
    • View Profile
Re: Alky Tank Leak?
« Reply #4 on: August 10 2018, 05:52:44 PM »
Sounds like it's not going to work out! :icon_confused:

Offline The Radius Kid

  • Turbo Street Limited
  • ***
  • Posts: 110
  • PSI: 0
    • View Profile
Re: Alky Tank Leak?
« Reply #5 on: August 14 2018, 11:41:12 AM »
Sounds like it's not going to work out! :icon_confused:

This sounds lie something I ran into before.
Got a pic' or the offender without the hose on?

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1337
  • PSI: 5
  • Boost n00b
    • View Profile
Re: Alky Tank Leak?
« Reply #6 on: August 14 2018, 11:55:48 AM »
I talked to Julio yesterday.  He said it is the same connection like a boost gauge.  The fitting was very loose.  So that is tightened up.  But I ordered an extra tank for my inventory! :D

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal