Author Topic: ideas to seal air box  (Read 7621 times)

0 Members and 1 Guest are viewing this topic.

Offline dyermullet

  • Turbo Street Limited
  • ***
  • Posts: 159
  • PSI: 0
  • Boost n00b
    • View Profile
ideas to seal air box
« on: June 06 2015, 01:25:45 PM »
The gasket between the two halfs was destroyed when I took the top off the air box.  Any ideas of what I can use to replace it?

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: ideas to seal air box
« Reply #1 on: June 07 2015, 03:35:19 AM »
The stock airbox?    I haven't seen one of those in decades!  lol




How about a strip of that sticky foam for sealing up household door and windows?
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline dyermullet

  • Turbo Street Limited
  • ***
  • Posts: 159
  • PSI: 0
  • Boost n00b
    • View Profile
Re: ideas to seal air box
« Reply #2 on: June 07 2015, 10:17:56 AM »
Sorry the heater core and evaperator core box. 

I am trying to avoid just silicone  glueing it down.  I dont want it to break sometime when i remove.

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: ideas to seal air box
« Reply #3 on: June 08 2015, 08:30:19 AM »
Same thing...   wide sticky foam
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline dyermullet

  • Turbo Street Limited
  • ***
  • Posts: 159
  • PSI: 0
  • Boost n00b
    • View Profile
Re: ideas to seal air box
« Reply #4 on: June 08 2015, 08:55:17 AM »
Lowes or home depot kind of item?

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: ideas to seal air box
« Reply #5 on: June 08 2015, 01:53:36 PM »
that will work, or you can buy some of the black caulking strips and lay them around the opening.
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: ideas to seal air box
« Reply #6 on: June 08 2015, 02:19:28 PM »
Lowes or home depot kind of item?

I meant the wide sticky foam for sealing to the firewall.  It's can be found there or at walmart.

for the other parts, use the dum dum like Steve mentioned.


It's been a while since I did my heater core, but it seems like I had plenty there to just squish back in place.
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline dyermullet

  • Turbo Street Limited
  • ***
  • Posts: 159
  • PSI: 0
  • Boost n00b
    • View Profile
Re: ideas to seal air box
« Reply #7 on: June 08 2015, 04:29:52 PM »
Where  do i buy black caulking strips.

Mine fell apart and was full of mouse shit so it was disposed. 

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: ideas to seal air box
« Reply #8 on: June 08 2015, 04:58:07 PM »
auto parts store, auto paint store, stereo/tint shop that installs sunroofs, or get a friend that works at a body shop to grab you a scrap glob.   It's the same stuff that seals our 1/4 windows.
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: ideas to seal air box
« Reply #9 on: June 08 2015, 04:59:09 PM »
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Forzfed

  • Turbo Street Eliminator
  • ******
  • Posts: 1337
  • PSI: 5
  • Boost n00b
    • View Profile
Re: ideas to seal air box
« Reply #10 on: June 08 2015, 05:26:57 PM »
Someone used some crazy silicone on my old 85 T-Type and I almost cracked the housing trying to get it open.  That is all.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: ideas to seal air box
« Reply #11 on: June 08 2015, 06:20:46 PM »
when using silicone, one lays the bead down and lets it cure for about 30 minutes so that it has skinned over well, then puts the cover on.
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline dyermullet

  • Turbo Street Limited
  • ***
  • Posts: 159
  • PSI: 0
  • Boost n00b
    • View Profile
Re: ideas to seal air box
« Reply #12 on: July 08 2015, 12:01:10 PM »
think I bought them from amazon or such...but    http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/Seam-Sealer-Caulking-Strips-Black/_/R-MMM08578_0006438141
Thanks Steve.  That stuff was a PITA to use but it got the job done. 

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal