Author Topic: spring compressor??  (Read 3686 times)

0 Members and 1 Guest are viewing this topic.

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
spring compressor??
« on: July 03 2012, 11:24:35 AM »
Need to change front shocks in my daily driver, 05 STS, and shops want $300 labor. I can get a spring compressor for $50 and do it myself. Any type of compressor work better than another??
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5071
  • PSI: 234
    • View Profile
Re: spring compressor??
« Reply #1 on: July 03 2012, 12:00:57 PM »
Need to change front shocks in my daily driver, 05 STS, and shops want $300 labor. I can get a spring compressor for $50 and do it myself. Any type of compressor work better than another??

See if you can rent one from Autozone, etc. Many stores have tool rental programs.

I assume it's a McPherson strut system, correct?
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Re: spring compressor??
« Reply #2 on: July 03 2012, 02:16:33 PM »
actually spring over shock set-up. And I looked on good ol e-bay and can get a compressor for $16.  No brainer!
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Just a Six?

  • OK Now who Farted??
  • Turbo Street Eliminator
  • ******
  • Posts: 1252
  • PSI: 2
    • View Profile
Re: spring compressor??
« Reply #3 on: July 03 2012, 03:15:03 PM »
Lots of stories of springs flying around so be careful & chain it up. I can do the rears easily but I shy away from any front end work. I would try the tool rental progam since it's probably a decent unit??  :chin:
David
87 LTD. Purchased May 88
Doeskin leather, coach lites without Landau Roof, moon roof, carpeted trunk & No Factory Hood Ornament!
The sticker on AC shows a V-8 Carb car. Special order by Mr. Nick Hall VP of GM Canada
Runs 11.50 on 21 lbs with my old style 67 Q Trim & Alchy

Offline ULYCYC

  • Turbo Street Modified
  • *****
  • Posts: 870
  • PSI: 4
    • View Profile
Re: spring compressor??
« Reply #4 on: July 03 2012, 03:58:17 PM »
If you go to a real auto parts store that has a machine shop they will assemble them for you. Some also sell them loaded and you just exchange yours.
ED BAKER
87-T, Maplight equipped rear view mirror..
01 Park Ave Ultra S\'charged
BPG#1458

Offline Scott87

  • Bone Stock
  • **
  • Posts: 92
  • PSI: 0
  • Boost Tube
    • View Profile
Re: spring compressor??
« Reply #5 on: July 03 2012, 04:48:27 PM »
If you do decide to do it yourself make sure to put a lite coat of oil on the threads..

There is also a level you should probably purchase too. You affix it to the rotor zero it out. Then when you put the new strut back in make sure to put it back in rough bubble.

This will help with the alignment chances are good you will want to get an alignment.

Posted From Tapatalk

Offline $1987 GN$

  • Turbo Street Eliminator
  • ******
  • Posts: 1089
  • PSI: 1
    • View Profile
Re: spring compressor??
« Reply #6 on: July 03 2012, 07:10:34 PM »
actually spring over shock set-up. And I looked on good ol e-bay and can get a compressor for $16.  No brainer!

Not sure what you are getting for 16 bux sounds like some cheap threaded rod and hooks of questionable strength. Rent the tool you will get your money back when you take the tool back . . .

Or have the shop change them for you, it is a easy job done correctly and  done incorrectly will kill or maim you !

Also check/clean and or replace the strut bearings to they go bad from dirt and when you take the strut out it is easy to change.

AJ___

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: spring compressor??
« Reply #7 on: July 03 2012, 07:59:16 PM »
I would trade it in on a new one!  Another couple of years of these economic policies and the inflation will render your payments into pocket change....just like it did in the '70s here, and later in Argentina and Brasil
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal