Author Topic: 1993-2002 Camaro Question  (Read 2580 times)

0 Members and 1 Guest are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5549
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
1993-2002 Camaro Question
« on: March 18 2012, 11:26:28 AM »
The girlfriend is currently in the market for a 1993-2002 LT1/LS1 6 speed powered Camaro. My question is this. How much abuse can the 6 speed transmission and differential take if the engine is left in its stock configuration?
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Re: 1993-2002 Camaro Question
« Reply #1 on: March 18 2012, 01:18:26 PM »
My dad's 1995 LT1 6-speed has 150,000 miles on it - original clutch, no drive train problems.  Optispark on the  LT1 is a POS.  I would try and get a LS1 if possible.
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: 1993-2002 Camaro Question
« Reply #2 on: March 18 2012, 02:26:21 PM »
LS1....put some sticky tires on it and the clutch/tranny/rear end might object with 5000 rpm slide the foot off the clutch launches, but otherwise it should be fine
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline bcn30141

  • Bone Stock
  • **
  • Posts: 77
  • PSI: 0
  • Boost n00b
    • View Profile
Re: 1993-2002 Camaro Question
« Reply #3 on: March 09 2014, 10:55:47 AM »
I had an LS1 TA and drove the hell out of it for 70k miles, had 150 nitrous shot and K&N air filter only mods. No problems. Traded it in for a 03 Cobra.
Extnder Extme Chip, Scanmaster, ALKY kit, hot wire kit, 340 Areomotive Stealth, Accufab FP regulator, MSD 8.5, GN1 performance 3.5" down pipe, PYPEs Exhaust,210 215 Roller, Morral lifters, PAC springs, port and polished 8445 irons, Tnetics CPT-61 DBB, EVo wastegate, LS1 MAF, GEN2,BHJ, HS rlr rockers

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal