IHADAV8.com - Turbo Buick Tech, and Nonsense

Tech Area => General Buick Tech => Topic started by: Scoobum on June 18 2015, 11:08:34 PM

Title: TA SI Aluminum Head Port Measurement Pics
Post by: Scoobum on June 18 2015, 11:08:34 PM

Here's the measurements after Nick Micale reworked them. Jason...can you mic yours up for comparison?

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: good2win22 on June 19 2015, 05:55:05 AM

I'll get the measurements after work today. My were said to have the stage one port job which means just the bowls were worked but I'll measure wherever you like. Looks like you are measuring the intake and exhaust runners?

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: Scoobum on June 19 2015, 04:48:54 PM

Quote from: good2win22 on June 19 2015, 05:55:05 AM

I'll get the measurements after work today. My were said to have the stage one port job which means just the bowls were worked but I'll measure wherever you like. Looks like you are measuring the intake and exhaust runners?

I'm not sure if Nick did any bowl work. I'd be curious what your runner measurements are.

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: good2win22 on June 19 2015, 10:02:20 PM

Intake runner

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: good2win22 on June 19 2015, 10:03:44 PM

Exhaust runner

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: good2win22 on June 19 2015, 10:08:28 PM

Flow sheet

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: Steve Wood on June 20 2015, 12:19:06 AM

It's what has been done inside the ports, not at the mouth, and to the bowl area that makes the flow for the most part.... kinda doubt comparing the mouths is too meaningful

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: earlbrown on June 20 2015, 03:06:05 AM

Quote from: Steve Wood on June 20 2015, 12:19:06 AM

. kinda doubt comparing the mouths is too meaningful

You never met this chick Angie from my high school.

I still remember looking up at her when she said  "I've been told I can suck start a Mac Truck"

it's been many many years and I still believe her.  :)

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: Scoobum on June 20 2015, 07:57:48 AM

Jason...thanks so much. :)

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: Scoobum on June 20 2015, 08:01:52 AM

Quote from: earlbrown on June 20 2015, 03:06:05 AM

Quote from: Steve Wood on June 20 2015, 12:19:06 AM

. kinda doubt comparing the mouths is too meaningful

You never met this chick Angie from my high school.

I still remember looking up at her when she said  "I've been told I can suck start a Mac Truck"

it's been many many years and I still believe her.  :)

Getting divorced was the best thing that ever happened to me. I got the opportunity to meet ladies that were...lets say...orally enthusiastic. :rock:

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: Charlief1 on June 20 2015, 04:07:06 PM

Quote from: Scoobum on June 20 2015, 08:01:52 AM

Quote from: earlbrown on June 20 2015, 03:06:05 AM

Quote from: Steve Wood on June 20 2015, 12:19:06 AM

. kinda doubt comparing the mouths is too meaningful

You never met this chick Angie from my high school.

I still remember looking up at her when she said  "I've been told I can suck start a Mac Truck"

it's been many many years and I still believe her.  :)

Getting divorced was the best thing that ever happened to me. I got the opportunity to meet ladies that were...lets say...orally enthusiastic. :rock:

With my luck that means she'd never shut the fuck up. :013:

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: Steve Wood on June 20 2015, 04:52:28 PM

LOL...for sure

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: good2win22 on June 20 2015, 09:43:12 PM

Quote from: Scoobum on June 20 2015, 08:01:52 AM

Quote from: earlbrown on June 20 2015, 03:06:05 AM

Quote from: Steve Wood on June 20 2015, 12:19:06 AM

. kinda doubt comparing the mouths is too meaningful

You never met this chick Angie from my high school.

I still remember looking up at her when she said  "I've been told I can suck start a Mac Truck"

it's been many many years and I still believe her.  :)

Getting divorced was the best thing that ever happened to me. I got the opportunity to meet ladies that were...lets say...orally enthusiastic. :rock:

What gives with the married ladies???....  I haven't even broached the subject in like a decade

Title: Re: TA SI Aluminum Head Port Measurement Pics
Post by: good2win22 on June 20 2015, 09:44:35 PM

Best I could get without a bore scope camera