Tech Area > Transmissions

FEL-PRO Transmission Pan Gasket

(1/1)

gnonyx:
Can I apply silicone on pan for this Fel-Pro gasket, or install it dry?

Steve Wood:
I have always installed them dry.  If I were using silicone, I would glue the gasket to the transmission instead of the pan.

gnonyx:

--- Quote from: Steve Wood on February 24 2020, 11:31:54 PM ---I have always installed them dry.  If I were using silicone, I would glue the gasket to the transmission instead of the pan.

--- End quote ---
Do you used the same gasket type, and if not what brand?

Scoobum:
The gasket you have is fine. No sealer.

Steve Wood:
Not much choice in gaskets for the transmission. Felpro is what I have used.  One of these days I will change mine again.  They tend to start leaking when the car is not driven much-just like all the other gaskets :D


72-120 lb-inches of torque.  I think I used to set my wrench to 100 lb-inches

Navigation

[0] Message Index