Author Topic: Well, that was fun!  (Read 8411 times)

0 Members and 1 Guest are viewing this topic.

Offline Racer X

  • Turbo Street Eliminator
  • ******
  • Posts: 1347
  • PSI: 0
    • View Profile
    • http://www.hotrodbuick.com
Re: Well, that was fun!
« Reply #15 on: May 29 2006, 11:17:24 PM »
The motor was completely rebuilt about 10K miles ago. The heads have been ported and polished, 218/212 cam, 40# injectors. The TC I *think* is pretty normal, however, I am noty real sure what I have since I have been through 5 transmissions.

I am not going race the car just want a nasty streetable car, I'll let the driver take care of the rest.  :yawinkle:   :rofl;
2008 Charger SRT-8
2009 Challenger R/T
any questions?

DCEPTCN

  • Guest
Re: Well, that was fun!
« Reply #16 on: May 30 2006, 12:45:25 PM »
I'm in love with my '51. Hella streetable.... and with a larger cam like that, you owe it to yourself to get a churbo that will will use it.

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Re: Well, that was fun!
« Reply #17 on: May 30 2006, 01:17:18 PM »
With a stock converter, the LE 44 is a good choice.
If you up the converter a little,  a ball bearing 60 series would
kick ass. Not cheap, and you may run out of injector, but insanely
fast street car.
Rob

Offline Racer X

  • Turbo Street Eliminator
  • ******
  • Posts: 1347
  • PSI: 0
    • View Profile
    • http://www.hotrodbuick.com
Well, that was fun!
« Reply #18 on: May 30 2006, 02:54:23 PM »
I just got off the phone with Limited Engineering and I bought a 60.

The guy told me that the 60 and the 44 were the same price and with my heads and cam the 60 would breathe deeper and better.

Should be here in about 6-8 days.
2008 Charger SRT-8
2009 Challenger R/T
any questions?

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Well, that was fun!
« Reply #19 on: May 30 2006, 02:56:14 PM »
Are you sending your old turbo back as a core?
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Racer X

  • Turbo Street Eliminator
  • ******
  • Posts: 1347
  • PSI: 0
    • View Profile
    • http://www.hotrodbuick.com
Well, that was fun!
« Reply #20 on: May 30 2006, 03:12:43 PM »
No. I have a Turbonetics. They didn't even ask for it.

I need to get the three hoses 3" hoses to hook this back up and I would like to get those cool looking blue ones.

Where?
2008 Charger SRT-8
2009 Challenger R/T
any questions?

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Well, that was fun!
« Reply #21 on: May 30 2006, 03:47:40 PM »
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Racer X

  • Turbo Street Eliminator
  • ******
  • Posts: 1347
  • PSI: 0
    • View Profile
    • http://www.hotrodbuick.com
Well, that was fun!
« Reply #22 on: May 30 2006, 06:22:49 PM »
Thanks Chris!
2008 Charger SRT-8
2009 Challenger R/T
any questions?

Offline Racer X

  • Turbo Street Eliminator
  • ******
  • Posts: 1347
  • PSI: 0
    • View Profile
    • http://www.hotrodbuick.com
Well, that was fun!
« Reply #23 on: May 30 2006, 07:49:21 PM »
I actually got me hoses from Brian at GBody parts. Picked up new vacuum hoses while I was there.
2008 Charger SRT-8
2009 Challenger R/T
any questions?

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Re: Well, that was fun!
« Reply #24 on: May 30 2006, 09:15:09 PM »
Excellent ! It should rip ! :psix;  :supz:
Rob

Offline Racer X

  • Turbo Street Eliminator
  • ******
  • Posts: 1347
  • PSI: 0
    • View Profile
    • http://www.hotrodbuick.com
Well, that was fun!
« Reply #25 on: June 06 2006, 11:06:42 AM »
Got the new te-60 last night and put it in. I just need the hoses now so I can finish the install.

Hey Rob, is there some sealant that I need to use between the THDP and Turbo?
2008 Charger SRT-8
2009 Challenger R/T
any questions?

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Well, that was fun!
« Reply #26 on: June 06 2006, 12:45:55 PM »
Quote from: "Racer X @ Tue Jun 06, 2006 10:06 am"
Got the new te-60 last night and put it in. I just need the hoses now so I can finish the install.

Hey Rob, is there some sealant that I need to use between the THDP and Turbo?

I'd use a little bit of high temp grease. The heat form the exhaust gasses will
quickly turn it into carbon and make it self sealing. The DP doesn't see the high pressure like the manifolds and crossover pipe do.
Rob

Offline Be4u

  • Turbo Street Outlaw
  • *******
  • Posts: 3548
  • PSI: 0
    • View Profile
    • http://www.cardomain.com/memberpage/400586
Well, that was fun!
« Reply #27 on: June 08 2006, 10:20:41 PM »
as a side note, I never used anything....up on removal of the downpipe I never had a leak...took it off what, three times?
Save the bumper fillers!
Move to Canadia!

Offline Recklessrob

  • Turbo Street Outlaw
  • *******
  • Posts: 5112
  • PSI: 3
    • View Profile
Well, that was fun!
« Reply #28 on: June 09 2006, 01:57:10 AM »
Quote from: "Be4u @ Thu Jun 08, 2006 9:20 pm"
as a side note, I never used anything....up on removal of the downpipe I never had a leak...took it off what, three times?

Cool. Are your headers installed yet ?
Rob

Offline ledzeppac

  • Turbo Street Modified
  • *****
  • Posts: 812
  • PSI: 0
    • View Profile
Well, that was fun!
« Reply #29 on: June 09 2006, 03:50:48 AM »
yah i got a ta 60.. still havnt given it the boost it deserves....

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal