« previous next »
Pages: [1]   Go Down

Author Topic: Article on crimping  (Read 2587 times)

0 Members and 1 Guest are viewing this topic.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6515
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Article on crimping
« on: July 10 2012, 11:14:26 AM »
Logged
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline Scott87

  • Bone Stock
  • **
  • Posts: 92
  • PSI: 0
  • Boost Tube
    • View Profile
Re: Article on crimping
« Reply #1 on: July 15 2012, 10:24:34 AM »
Interesting read.

Posted From Tapatalk
Logged

Offline ULYCYC

  • Turbo Street Modified
  • *****
  • Posts: 870
  • PSI: 4
    • View Profile
Re: Article on crimping
« Reply #2 on: July 15 2012, 10:52:25 AM »
Biggest issue with this is all the garbage that comes from China.  Crimping a terminal bought at the flea market or swapmeet  crumbles in the tool. Buying name brands like Belden, Ancor and other quality stuff is half the battle. Also having a good crimping tool and knowing how to use it.
Logged
ED BAKER
87-T, Maplight equipped rear view mirror..
01 Park Ave Ultra S\'charged
BPG#1458

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6515
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: Article on crimping
« Reply #3 on: July 16 2012, 08:42:21 AM »
I don't think people realize this( above), -- that even for your standard spade family there are double layer terminals with a secondary metal sleeve in the crimp area. 
Logged
-Drain plug by Earl Brown, custom oil pan by Rich's Auto
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal