IHADAV8.com - Turbo Buick Tech, and Nonsense
General => For Sale/Trade/Want To Buy => Topic started by: gordyzx9r on October 31 2014, 12:49:25 AM
-
Just in time for :114: !
It's stuff you don't need and/or don't want but will buy anyways 'cause it's car parts and it beats the crap out of buying purses and handbags and shit that your wife/GF/SO will spend your money on. Most of it's old crap that was pulled off of my GN at one point or another as I upgraded and/or replaced shit for no reason. But there are a few new items on the list which I've had sitting around for awhile...
So, what's in the pictures below is what there is. If you don't see the hardware in the pic, then it's not there. A couple of items I don't have the instructions on.
Make offers, don't forget about S&H. I'm shipping from 36619.
If you live in/near Pensacola, Mobile, Biloxi, Gulfport, New Orleans, Baton Rouge, Shreveport, Hattiesburg, and/or near any of those places along I10/I12 I might be able to save you S&H and deliver them in person (so long as you don't need it right away and can wait a couple weeks or so until I meander into those towns on business).
· 2 Bar MAP Sensor
· Air Filter Housing w/Dirty Air Filter
· Alternator
· AM/FM Cassette Player (in '99 I had the tape deck repaired...I think it still works)
· Ash Tray
· ATR Billet Oil Filler Tube
· ATR Black Beauty 8mm Plug Wires
· ATR Downpipe
· ATR PCV (2)
· ATR Pitbull Chip
· Cam, OEM (came out of my GN with 80K miles…not sure what you’d want it for)
· Casper’s Ground Stretcher Kit
· Casper's Tach Tap Mating
· Casper's VDO Converter
· Charcoal Canister Bracket
· Chip
· Crankshaft Sensor (I'm pretty sure this is one of the "recalled" ones...not sure why anyone would want it, but here it is nonetheless)
· EGR Stuff
· EGR Stuff (see pics)
· Fake Wood Trim for a Limited
· Front Cover
· Front Cover, Machined (the one with the pump)
· Front License Plate Bracket
· Fuel Injectors: As far as I know the injectors are the stock injectors
· Fuel Pressure Regulator
· GN Wheels (2)
· GNS Accessory Fuse Box Kit, New
· GNS Radiator Box In Kit, New (http://www.gnsperformance.com/# (http://www.gnsperformance.com/#)!bodyframe-g-body/c15ae)
· Horn Ring, New
· IAC
· IC Fan, New
· IC Fan, Old
· IC Shroud
· Intercooler, old (79K miles)
· Jack
· Kirban’s Body Mount Frame Washers
· Kirban’s Brake Dust Shield (4)
· Kirban’s Reproduction Vacuum Line Set
· Kirban’s Valve Springs
· Kirban’s 3 Piece Front Brace Kit, used (no mounting hardware)
· Lower Control Arms, OEM
· Oil Pressure Sender
· PCV (2)
· Plug Wires (I don't know if these are original or not, they're grey and they say "Autolite" on them)
· Poston fuel pump wiring upgrade (I do not have the instructions)
· Prothane Urethane Body Bushing Kit
· Quick Spool Controller (I don't know who made this...I think I ordered it off of ebay, but never used it)
· Radiator Cap
· Radiator Overflow Tank
· Ramchargers Dual Fans w/Racetronix PNP Wiring Harness Kit (never installed)
· Rearview Mirror
· RJC Pulley
· Starter, Mini
· Starter, OEM
· Stewart Warner 10K RPM Tach (never installed, I just used it when I was troubleshootin g a problem with my 8K tack)
· Stewart Warner Fuel Pressure Gauge
· Stewart Warner Mechanical Oil Pressure Gauge
· Stock Front Cover
· Stock heads Set 1 (I was told they’re leaking past the valves)
· Stock heads Set 2 (came off of my GN w/80K miles)
· TA-49: Rebuilt by PTE MAR 2015
· Timing Chain and Gears, Old
· Timing Chain Set, New
· TPS
· Turbo Tweak Chips (4)
· Upper Control Arms, OEM
· Vacuum Block
· Vacuum Lines
· Wastegate Vacuum Hose (2)
· Water Temp Sender
· Windshield Washer Fluid Tank
-
Pics
-
More Pics
-
More Pics
-
More Pics
-
More Pics
-
More Pics
-
More Pics
-
More Pics
-
More Pics
-
More Pics
-
Hey Gordy!
I'm looking to shave some weight and interested in the mini starter and the crank pulley. Do you know if the pulley is standard or underdrive? How about $150 shipped to 76528? Also, your preferred payment method. Thanks in advance! Jason
-
Interested in. Brake dust covers, IC Fan New, Oil breather tube, Kirban valve springs. electric fans and harness.
Would $175.00 do it to 08009 NJ.
-
Hi Gordy,
I'm interested in the Caspers VDO inline cable converter...
How about $40. shipped to 14303?
thanks,
dave
-
How many miles on the stock timing set?
-
Hey Gordy!
I'm looking to shave some weight and interested in the mini starter and the crank pulley. Do you know if the pulley is standard or underdrive? How about $150 shipped to 76528? Also, your preferred payment method. Thanks in advance! Jason
Standard on the pulley.
Price is good.
Paypal: gordyzx9r@hotmail.com
-
Interested in. Brake dust covers, IC Fan New, Oil breather tube, Kirban valve springs. electric fans and harness.
Would $175.00 do it to 08009 NJ.
$225, shipped. All of that is new except for the breather tube.
-
Hi Gordy,
I'm interested in the Caspers VDO inline cable converter...
How about $40. shipped to 14303?
thanks,
dave
Sure.
Paypal: gordyzx9r@hotmail.com
-
How many miles on the stock timing set?
There are two sets. The new set, which was never used. And the three pieces in the pic left over from the old set which have about 80K miles.
-
Hey Gordy!
I'm looking to shave some weight and interested in the mini starter and the crank pulley. Do you know if the pulley is standard or underdrive? How about $150 shipped to 76528? Also, your preferred payment method. Thanks in advance! Jason
Standard on the pulley.
Price is good.
Paypal: gordyzx9r@hotmail.com
Payment sent. Thanks!
-
Hey Gordy!
I'm looking to shave some weight and interested in the mini starter and the crank pulley. Do you know if the pulley is standard or underdrive? How about $150 shipped to 76528? Also, your preferred payment method. Thanks in advance! Jason
Standard on the pulley.
Price is good.
Paypal: gordyzx9r@hotmail.com
Payment sent. Thanks!
Thanks, I'll ship out during my lunch break.
-
The new timing chain set is sold.
I also added a GNS Radiator Box In Kit that I still have new in the box.
-
Gordy will you do $35.00 for both TPS ship to Canada?
-
Gordy will you do $35.00 for both TPS ship to Canada?
What's the best method of S&H to Canada?
-
US mail - might have to fill a CN22 form
-
cheap's way Let me know.
-
cheap's way Let me know.
That works. Paypal: gordyzx9r@hotmail.com
I'm headed out to the PO now to ship out the other stuff, I'll take them with me.
Email me your address at gordyzx9r@hotmail.com, if I get it in time I'll ship them out while I'm there.
Thanks,
Gordy
-
Its on its way.
-
Its on its way.
Shipped. Thanks.
-
The starter and pulley shipped today.
The timing set shipped today.
2 TPS shipped today.
-
The starter and pulley shipped today.
The timing set shipped today.
2 TPS shipped today.
Thanks! Let ya know when it arrives.
-
Thank's Gordy. :cheers:
-
Hey Gord,
How about $45. shipped for the GNS radiator box kit.....shippi ng to 14303
(can ship with Caspers' VDO cable convertor already coming my way).
thanks,
dave
-
Hey Gord,
How about $45. shipped for the GNS radiator box kit.....shippi ng to 14303
(can ship with Caspers' VDO cable convertor already coming my way).
thanks,
dave
Deal.
-
PayPal Payment of $85. sent for both items Gord.....
Caspers' VDO Cable Covertor & GNS Radiator Box in kit.
Thanks,
dave
-
PayPal Payment of $85. sent for both items Gord.....
Caspers' VDO Cable Covertor & GNS Radiator Box in kit.
Thanks,
dave
Got it, I don't think I'll be able to ship it today...but I will be going by the post office tomorrow.
-
The starter and pulley shipped today.
The timing set shipped today.
2 TPS shipped today.
Wow
Go down(up?) to Brian's and show him how its done
-
The starter and pulley shipped today.
The timing set shipped today.
2 TPS shipped today.
Wow
Go down(up?) to Brian's and show him how its done
I take it that hasn't gotten any better...
What's the latest on vendor drama these days? We lose anymore vendors? A friend of mine told me the other day he was thinking of getting back into TRs and was going to order some catalogs from ATR, Poston, and Kenne Bell...had to break it to him.
-
I also found a stock IC that was on the car for 79K miles and I also found an old Kirban's 3 piece front brace kit.
-
Got your message. Yes! Sent you a pm with paypal info. Thank you.Derek
-
Brake dust covers, IC Fan New, Oil breather tube, Kirban valve springs. & the Ramchargers Fans/Racetronix harness is sold.
-
PayPal Payment of $85. sent for both items Gord.....
Caspers' VDO Cable Covertor & GNS Radiator Box in kit.
Thanks,
dave
Shipped today.
-
Starter and pulley arrived today. Thanks again!
-
Hey Gordy. Got my parts today. Sent you a pm. Thank you.
-
Might be interested in one or both PCV's (not ATR ones). Please confirm model numbers and if new or used.
-
Hey Gord,
Sent you a PM
Have a Happy New Year!
:cheers:
dave
-
Holiday season was insane...trave l, kids, GF, family, insanity. I'm back and answering PMs from mid-December. Sorry guys.
-
Update the list and scratched out sold items.
Need to add something.
I had to have my turbo rebuilt so I sent the TA49 along with it to be rebuilt as well.
Comes with a 1 year warranty that started this month.
What you see in the pics is what you get.
$500 + S&H.