Author Topic: Check Valve-Pic Inside  (Read 2985 times)

0 Members and 1 Guest are viewing this topic.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5557
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Check Valve-Pic Inside
« on: July 26 2016, 09:37:32 PM »
I removed the charcoal canister a few weeks back...but forgot I had an ATR relocation kit. I installed it...but forgot about this check valve. The black end has vacuum stamped on it...so I assume this goes to the engine side to burn any vapours/fuel from the cansiter.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Re: Check Valve-Pic Inside
« Reply #1 on: July 26 2016, 10:18:57 PM »
I think your right :rock:
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Check Valve-Pic Inside
« Reply #2 on: July 27 2016, 12:18:55 AM »
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Check Valve-Pic Inside
« Reply #3 on: July 27 2016, 12:19:49 AM »
always good to check them to see if they still work...suck on the engine side but not able to blow thru it from the engine side
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5557
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Re: Check Valve-Pic Inside
« Reply #4 on: July 27 2016, 05:23:19 PM »
Still working. :)
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline GavinHunyady

  • Turbo Street Limited
  • ***
  • Posts: 168
  • PSI: 1
  • Boost n00b
    • View Profile
Re: Check Valve-Pic Inside
« Reply #5 on: July 28 2016, 11:54:42 AM »
yum.... hydrocarbons.  :atbeer:

Offline earlbrown

  • Turbo Street Eliminator
  • ******
  • Posts: 1571
  • PSI: 6
    • View Profile
Re: Check Valve-Pic Inside
« Reply #6 on: August 01 2016, 02:18:22 AM »
Just put it in your mouth and suck.


(man,if I had a dime for every time I said that)

If it works, air will only go one way.  If if goes both ways (like many new 'lesbians' I know0 then it's shot and need to be replaced.
'87 GN - 4.2L SFI Turbocharged innercooled V6 - Chrome valve covers - supra pump - 14" K&N - 52mm throttlebody - rocker shaft supports -  1/2 intake spacer - TB coolant bypass - 3" ATR exhaust tip - Alum intake pipe - NOS timing cover - chip - relocated charcoal canister - CR42's - stock

Offline Be4u

  • Turbo Street Outlaw
  • *******
  • Posts: 3548
  • PSI: 0
    • View Profile
    • http://www.cardomain.com/memberpage/400586
Re: Check Valve-Pic Inside
« Reply #7 on: August 01 2016, 04:36:30 AM »
I :049: Earl.
Save the bumper fillers!
Move to Canadia!

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal