Author Topic: LS1 MAF Backup  (Read 2977 times)

0 Members and 1 Guest are viewing this topic.

Offline gnonyx

  • Turbo Street Modified
  • *****
  • Posts: 505
  • PSI: 0
  • Boost n00b
    • View Profile
LS1 MAF Backup
« on: May 15 2021, 08:38:36 AM »
Hi All,
what cars has the LS1 3.5" MAF?
I want to have a backup in case my MAF fails
Thanks
87 GN T-Top, ScanMaster, hot-wire kit, Full Throttle chips w/ matching 60# injectors, adj. fuel pump, and triple pod gauges w/ AEM A/F gauge, oil pressure gauge, vac/boost gauge, Kenne Belle rear seat brace, upgraded tranny w/ Art Carr pan cover, and a pre-lube oil system.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9890
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: LS1 MAF Backup
« Reply #1 on: May 15 2021, 04:54:03 PM »
I don't see a list of what they were used on.  Earl Brown has some used ones on ebay.

Eric sells the latest models which are supposedly more reliable on turbotweak.com
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline gnonyx

  • Turbo Street Modified
  • *****
  • Posts: 505
  • PSI: 0
  • Boost n00b
    • View Profile
Re: LS1 MAF Backup
« Reply #2 on: May 15 2021, 07:48:08 PM »
I don't see a list of what they were used on.  Earl Brown has some used ones on ebay.

Eric sells the latest models which are supposedly more reliable on turbotweak.com
I had a list of most vehicles that uses the acceptable MAF, but I can't find it, and yes I saw Earl's items on EBay, but his price has gone up than previous sold MAF's
Any vendors on board prices is more than I want to spend for a backup, as I already did when I replace the original MAF with Highway Stars MAF.
Thanks Steve
87 GN T-Top, ScanMaster, hot-wire kit, Full Throttle chips w/ matching 60# injectors, adj. fuel pump, and triple pod gauges w/ AEM A/F gauge, oil pressure gauge, vac/boost gauge, Kenne Belle rear seat brace, upgraded tranny w/ Art Carr pan cover, and a pre-lube oil system.

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9890
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: LS1 MAF Backup
« Reply #3 on: May 15 2021, 10:29:46 PM »
I would check these cars. Maybe go to rock auto and see if they used the same maf.

Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline gnonyx

  • Turbo Street Modified
  • *****
  • Posts: 505
  • PSI: 0
  • Boost n00b
    • View Profile
Re: LS1 MAF Backup
« Reply #4 on: May 15 2021, 11:59:10 PM »
I would check these cars. Maybe go to rock auto and see if they used the same maf.

Thanks for the info Steve, I will check them out
87 GN T-Top, ScanMaster, hot-wire kit, Full Throttle chips w/ matching 60# injectors, adj. fuel pump, and triple pod gauges w/ AEM A/F gauge, oil pressure gauge, vac/boost gauge, Kenne Belle rear seat brace, upgraded tranny w/ Art Carr pan cover, and a pre-lube oil system.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6515
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: LS1 MAF Backup
« Reply #5 on: May 16 2021, 09:14:15 PM »
Libraries used to keep hollander interchange manuals, no idea if they still do.
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline gnonyx

  • Turbo Street Modified
  • *****
  • Posts: 505
  • PSI: 0
  • Boost n00b
    • View Profile
Re: LS1 MAF Backup
« Reply #6 on: May 16 2021, 10:05:47 PM »
Libraries used to keep hollander interchange manuals, no idea if they still do.
Yes I know I had a printed list and now I can't seem to find it.
87 GN T-Top, ScanMaster, hot-wire kit, Full Throttle chips w/ matching 60# injectors, adj. fuel pump, and triple pod gauges w/ AEM A/F gauge, oil pressure gauge, vac/boost gauge, Kenne Belle rear seat brace, upgraded tranny w/ Art Carr pan cover, and a pre-lube oil system.

Offline nocooler

  • Administrator
  • Turbo Street Eliminator
  • ******
  • Posts: 1790
  • PSI: 3
    • View Profile
Re: LS1 MAF Backup
« Reply #7 on: May 19 2021, 12:21:06 PM »
I have a 3.5" LS1 sensor if you still need one. I've got a couple of the 85mm 5 wire truck/vette sensors as well.
IhaveaV8

Offline gnonyx

  • Turbo Street Modified
  • *****
  • Posts: 505
  • PSI: 0
  • Boost n00b
    • View Profile
Re: LS1 MAF Backup
« Reply #8 on: May 19 2021, 08:48:10 PM »
I have a 3.5" LS1 sensor if you still need one. I've got a couple of the 85mm 5 wire truck/vette sensors as well.
That sounds great, and the best part for you, how much for the 3.5 LS1? :icon_keel:
87 GN T-Top, ScanMaster, hot-wire kit, Full Throttle chips w/ matching 60# injectors, adj. fuel pump, and triple pod gauges w/ AEM A/F gauge, oil pressure gauge, vac/boost gauge, Kenne Belle rear seat brace, upgraded tranny w/ Art Carr pan cover, and a pre-lube oil system.

Offline nocooler

  • Administrator
  • Turbo Street Eliminator
  • ******
  • Posts: 1790
  • PSI: 3
    • View Profile
Re: LS1 MAF Backup
« Reply #9 on: May 20 2021, 01:03:13 PM »
I'm thinking $50 + actual shipping.
IhaveaV8

Offline gnonyx

  • Turbo Street Modified
  • *****
  • Posts: 505
  • PSI: 0
  • Boost n00b
    • View Profile
Re: LS1 MAF Backup
« Reply #10 on: May 21 2021, 10:02:29 AM »
I'm thinking $50 + actual shipping.
Sent PM
87 GN T-Top, ScanMaster, hot-wire kit, Full Throttle chips w/ matching 60# injectors, adj. fuel pump, and triple pod gauges w/ AEM A/F gauge, oil pressure gauge, vac/boost gauge, Kenne Belle rear seat brace, upgraded tranny w/ Art Carr pan cover, and a pre-lube oil system.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal