IHADAV8.com - Turbo Buick Tech, and Nonsense

Tech Area => General Buick Tech => Topic started by: Shimy87 on September 09 2021, 09:12:54 AM

Title: lowering the rear
Post by: Shimy87 on September 09 2021, 09:12:54 AM

Im cheap so years ago I cut down the front springs to lower the front about 1 inch. Now with the taller M&H tires on the rear it has to much height in the back, looks silly. Question is, can i cut the backs down the same way to get the back down some. I know i cant cut the one end but the other looks like i can??

Thanks!!

Title: Re: lowering the rear
Post by: Steve Wood on September 09 2021, 09:29:56 AM

just use a saw and take a little at a time...saw so the heat does not weaken the spring

most real car guys are cheap....

Title: Re: lowering the rear
Post by: Shimy87 on September 09 2021, 03:15:35 PM

thanks Steve!!