Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - BoostedRPS

Pages: [1]
1
Vendor Info, Steals And Deals! / RPS's new Return Line Upgrade kits!
« on: August 04 2018, 09:59:34 AM »
New Return Line kits from RPS.


For those people who want to upgrade your fuel lines, but don't want to spend $500 on a setup, this return line kit comes with a new -6AN return line and adapter fitting for the pressure regulator.


We all know the stock feed line will take you to the 10s, so if that works for you, this kit was made to save you money by offering ONLY what you NEED.


Installin g this return line, along with making sure the sending unit return line tubes are ported out (if need be) will allow you to run larger fuel pumps on the stock feed lines, along with swapping to an E85 setup if you desire.


Fuel return lines are 16.5 feet ( 16-1/2 )long.
They come with; metric to AN adapter fitting with aluminum crush washer that mounts at the bottom of the stock style fuel pressure regulator. One side of the line has a 90degree fitting on it, and the otherside has a straight -6AN hose end on it.


If you do not have a sending unit that has AN fittings on it, we can remove the straight AN fitting and include worm-gear hose clamps, so that you can slide the nylon hose over the return line hose barb on the sending unit. If you want this done we reduce the cost by $10.


These kits are $150 shipped to the lower 48 states right now. We have 3 more kits available and IN STOCK READY TO SHIP.


KIT DOES NOT COME STANDARD WITH PICTURED FUEL FILTER. PLEASE READ BELOW FOR FURTHER DETAILS.OPTION AL:


New fuel filter (same as pictured) with adapter fittings so that you can install a new E85-compatible fuel filter. These DeatschWerks fuel filters have a 3 year warranty, are 10 micron stainless steel filter elements, and have less than 1 psi of backpressure rise-over 40sq inches of surface area. Fuel filter add-on is $140 SHIPPED to the lower 48 states. All filters are drop-shipped from DeatschWerks to reduce overall costs (by not having to pass on the extra cost to have it shipped to us and then shipped to you).


For questions or orders, please call or text Tyler at 707 362 6030 or email at 1987GN@gmail.com
Thank you,Tyler

2
IHADAV8 Playground / BLACK FRIDAY SPECIALS!!!
« on: November 10 2017, 05:48:30 AM »

We at RPS took note of the responses in the polls that I posted, and we gave careful thought to what we want to offer for our Black Friday Specials.


These specials will actually start Friday, November 10th and run until Friday November 24th, so you have two weeks to purchase these parts.


Being as this is our first ever Black Friday sale, we contacted some of the manufacturers that we deal with, and they gave us a one-time-only special discount so that we could offer you fine folks of [color=rgb(189, 189, 189) !important]TurboBuick.com[/color] some really incredible discounts on products.


So, without further delay, here is what we are offering for our Black Friday Specials, prices do not include freight or tax:


1) RPS forged crankshaft in 3.400" or 3.625" stroke, narrow journal, off center, and it includes a neutral balance flexplate for $695. This is the same crank used in Arizona GN (Nick Micale) motors that Zimmerman builds. It is very similar to the crankshaft that Cruz Performance sells. The price of $695 includes the neutral balance flexplate. We are sorry, but in order to get this pricing we could not order it without the flexplate, so this deal cannot have the flexplate removed from the order. Again, Price is $695 which includes the flexplate as well.


2) Billet 4340 steel #2 and #3 main caps. $140.


3) SCAT Forged 4340 steel crank in either 3.400" or 3.625" stroke, narrow journal, off center. Price is $560.


4) SCAT stock stroke rotating assembly with JE pistons and a 5.970" rod length. Pistons come in .010, .020, .030, and .040 bore sizes. Pricing does include piston rings. We are also going to let anyone who purchases a rotating assembly and wants to add on our billet main caps (Item #2) to the order, they can purchase the billet caps for only $125 addtional. Price is $1,616. Add $125 if you want to add #2 and #3 billet main caps.
***We are trying to obtain stroker forged rotating assemblies to offer as well, but we do not have anything confirmed yet. Once we do, we will update the thread if we are able to obtain excellent pricing on a forged stroker rotating assembly. Again, Price is $1,616. To add billet main caps is $125 additional.


5) SCAT FORGED BALANCED stock stroke rotating assembly. This means that SCAT actually balances your rotating assembly for you to within +/- 2 grams, I believe. They internally balance the rotating assembly (obviously). This means that when you receive this rotating assembly, all you need is a neutral balance flexplate and balancer, and you can drop this rotating assembly in your motor! This kit saves you from having to take your assembly to a machine shop and pay their costs to balance your rotating assembly, and wait the month or two wait period for them to get around to working on your parts. With this kit all of those problems are solved! SCAT balances your rotating assembly for you, so for those DIY racers, or even the local neighborhood GN mechanic who builds motors in his spare time for some extra income- this assembly arrives ready to drop in the motor, and saves you tons of extra time because now you don't have to bring your parts to the machine shop and wait for them to get around to balancing your parts, which could be weeks or months, depending on how busy your shop is! This balanced assembly comes with forged JE pistons and rings, just like the unbalanced assembly. It is a stock 3.400" stroke with a 5.970" rod, off center, narrow journal. The pistons come in .010, .020, .030, and .040 bore sizes.We are also going to let anyone who purchases a rotating assembly and wants to add on our billet main caps (Item #2) to the order, they can purchase the billet caps for only $125 addtional. The cost for the balanced rotating assembly is $1,866. Add $125 if you want to add #2 and #3 billet main caps.


These prices will stop being valid at 11:59PM PST on November 24th, so if you are looking to capitalize on one of these incredible deals, make sure you contact us beforehand!


If you have any questions about any of these products, or may require some assistance in selecting the product that is right for you, please give me a call at 707 362 6030. I live in California, so my time zone is PST, for those worried about calling too late. If you would prefer to email any questions, my email is [color=rgb(189, 189, 189) !important]1987GN@gmail.com[/color]


If you wish to purchase one of these specials, please call or email me for payment details. Products will ship at the end of the Black Friday sale, so please keep that in mind. If you do wish to have expedited shipping and have your goods shipped prior to the end of the sale, arrangements can be made. Please call me to discuss specific details.


We at RPS hope you like our Black Friday specials and look forward to helping our customers get the best parts for the best prices!


-Tyler
[color=rgb(189, 189, 189) !important]www.boostedrps.com[/color]
Cell phone : 707 362 6030
Email: [color=rgb(189, 189, 189) !important]1987GN@gmail.com[/color]




On a somewhat related note..


We are also looking into providing pre-fabbed fuel line kits that will require no assembly and will be ready to install when you receive them. We are looking to use black nylon braided fuel line that is E-85 compatible with all black hose ends. Most likely it will be a -8 feed line with a -6 return line, and use a Weldon Racing stainless fuel filter for increased filtration and superior filter media surface area than what is currently offered on Buick fuel line kits right now. Stay tuned for these fuel line kits, they will hopefully be available shortly..

3
Hey Guys,


Racing Products and Services (RPS) is going to be offering special promotional pricing to Canadians-only, to try and help alleviate the pain of paying huge shipping fees and having a poor exchange rate.


Since this is the season to be giving, and once we are done giving, apparently we are supposed to be jolly, we at RPS figured it would be nice to help out those crazy denim-jean-wearing folks in Canada by putting together a list of parts that we know we can offer you some severe discounts on.


I will be working with Brad (Scooby Doo on tb.com) on this ordeal, and he has been kind enough to offer to receive the entire shipment for the order so that the freight fees can be reduced. We are looking to try and put together one large order so that we can send everything at once, and obviously the larger the order, the more we can discount our goods.


Due to some of the pricing I am going to offer being so friggin' awesome, I'm not going to be posting them online. Sorry, but you'll have to either call or email me. My cell is 707 362 6030, I live in California for those curious on the time zone, and my email is 1987GN@gmail.com


The products that we can hopefully offer you quite the discount on:
* SCAT forged stock stroke and stroker cranks
* SCAT forged connecting rods
* SCAT forged BALANCED rotating assemblies- meaning they come already internally balanced from the manufacturer. They use JE pistons and can be in .010-.040 bore sizes. They do NOT come with a flexplate.
* Our "RPS" forged stock and stroker crankshaft. This is the same crank used in all the Zimmerman motors, and the same crank Cruz sells.
* Billet Main caps
* Braided / Nylon / Push-loc fuel lines and fittings
* WORK Turbochargers; both WORK brand and Borg Warner
* HR Parts N Stuff suspension pieces
* Molnar Connecting rods
* JE Pistons
* CP Pistons
* Gee M Racing headers from Finland. Including the Street, Race, and their headers for Stage 2 heads.


If you guys have any interest in some of this stuff, please shoot me a text or phone call, or even an email, and I'll answer any questions.


The plan is to see what/who will be ordering parts, and what the regular-price cost would be for all the parts that people are looking to order. After we know what people are thinking of ordering, I'll have a better idea of how big of a discount we can give, and let you guys know how steep of discount percentage I can go. Once you know what the price will be, you let me know who wants to place the order and who doesn't, and we go from there!


Side note: Please no calls before 6am my time..I am NOT a morning person... texts are cool cause I don't hear them, but phone calls suck..


To get an idea of other stuff we carry, our site is www.boostedrps.com


Thank you for your time!
-Tyler

4
Hey Guys,


I am Marleyskater42 0 over on turbobuick.com, and Brad aka SCOOBY DOO told me about this site and that I should join up and take a look!


I am the newest vendor over at turbobuick.com, our website is www.boostedrps.com for those who are curious. We carry a lot of engine parts, turbos, Gee M Racing headers (1 of only 2 dealers in the US), HR and UMI suspension parts, Champion Racing Heads, CP/Ross/JE/Racetec/Diamond/Wiseco pistons, Turbosmart boost controllers and wastegates, and some cool stuff like our custom billet connecting rods that we have designed by Tom Molnar of Molnar Technologies.. .which were created to be superior to Crower rods in every way possible, yet be a FRACTION of the price!


I was told there are quite a few Canadians over on this board, and I told Brad that I would be happy to work out some special pricing to the fellas up North to help soften the blow from the steep shipping charges you guys encounter.


If you have any questions about parts from our website, or want to ask if I carry a certain part or can get access to it, please hit me up on my cell: 707 362 6030 or my email : 1987GN@gmail.com


I look forward to exploring this forum and getting to know the regulars over here!


-Tyler

Pages: [1]
SimplePortal 2.3.7 © 2008-2024, SimplePortal