Author Topic: Scanmaster Numbers Need Help  (Read 2361 times)

0 Members and 1 Guest are viewing this topic.

Offline roller3501

  • Newbie
  • *
  • Posts: 1
  • PSI: 0
    • View Profile
Scanmaster Numbers Need Help
« on: January 22 2011, 04:10:07 PM »
Here are the numbers that came up on the scan master. This was after making a wot run on the street and coming back and letting idle.

02 from 691 to 707 but rising slowly
AF 5
L8 35
BAT 13.7
INT 128
CLT 182
ATS Avg low 90's
RPM 750
TPS .42 @ idle
LAC 14
CC 10-251 rising slowly

It had knock of 7.5 degrees and 02 reading was 664 @ 78 mph

Went out ran it a second time and had knock of 6.6 degrees and 02 was 464 @ 104 mph

We have the TPS set @ .42 at idle

Need any input on what could be causng this knock. Fuel pressure is set at 40lbs. Thanks.

Offline 87granny

  • Bone Stock
  • **
  • Posts: 92
  • PSI: 0
    • View Profile
Re: Scanmaster Numbers Need Help
« Reply #1 on: January 22 2011, 05:12:54 PM »
Quote from: "roller3501 @ Sat Jan 22, 2011 4:10 pm"
Here are the numbers that came up on the scan master. This was after making a wot run on the street and coming back and letting idle.

02 from 691 to 707 but rising slowly
AF 5
L8 35
BAT 13.7
INT 128
CLT 182
ATS Avg low 90's
RPM 750
TPS .42 @ idle
LAC 14
CC 10-251 rising slowly

It had knock of 7.5 degrees and 02 reading was 664 @ 78 mph

Went out ran it a second time and had knock of 6.6 degrees and 02 was 464 @ 104 mph

We have the TPS set @ .42 at idle

Need any input on what could be causng this knock. Fuel pressure is set at 40lbs. Thanks.
Is your fuel psi raising with boost you may have a pump going south

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9889
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Scanmaster Numbers Need Help
« Reply #2 on: January 22 2011, 05:32:37 PM »
As we always tell people, O2s should be around 780 at wide open throttle
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal