IHADAV8.com - Turbo Buick Tech, and Nonsense
Tech Area => General Buick Tech => Topic started by: Gerry17 on July 29 2020, 08:01:50 AM
-
109 block .030 over with stock heads
-
Stock ones !! Will act like a fuse if ya mess yup. :cheers:
-
Yes, the stock ones for the cars running in the elevens or slower. Torque them down in several stages for best success. Note that the original factory head bolts cannot be reused. Buy ARP bolts and use them as a replacement.
Here is the number of the stock FelPro replacement in this link https://www.weberpowerproducts.com/steel-core-laminate-head-gasket-p/fel-9441pt.htm (https://www.weberpowerproducts.com/steel-core-laminate-head-gasket-p/fel-9441pt.htm)
-
thank you for the info
-
Felpros quality for head gaskets has gone down the shitter. Check the fire rings...don't be surprised to see them egg shaped. Take 'em back if they are. Victor Reinz are only way to fly.
-
Felpro went down the toilet 15 years ago. VR stopped making them. Even Weber does not have any left in stock. Maybe someone does..
-
I'd say go with RJC shims...but if you miss the tune you take a chance on hurting the bottom end.