Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Scoobum

Pages: 1 ... 294 295 [296] 297 298 ... 371
4426
IHADAV8 Playground / Re: New Personal Best 6.72 at 104.67
« on: October 13 2014, 04:10:06 PM »
With my Buick I just made due with mostly used parts and focused on the combination.

Brad you'll get to a point where you won't get anymore results from pushing it harder. At that time enjoy it. I kept on chasing the carrot and broke just about everything. I miss my car dearly but it was time to move on. I made some bad decisions - fiberglass doors, and trying to install the cage myself.

Sometimes I wish I would have left the firebird alone - it was fun to drive stock, now it's more of a hassle. Guess I need a Buick for a driver eh ?




Jeremy, I completely understand what you're saying. I have my two other Camaros for crusing in...and I've decided to keep the 80 Z28 over the 85, and I'm gonna sell it off in the spring. I made a decision 2 years ago to strictly track the GN...and make a concerted effort to speed it up. On the Thanksgiving weekend up here...then I go all in with it and see what I can squeeze out of it. This turbo isn't all in till 29 PSI...so there's a couple tenths left...and I'll try for them next fall. The rest of the year I have the car backed off to 7.2 to 7.3 for grudge/bracket racing. I remember Steve saying years ago if you can get one of these things running consistent low 11's...and your quick on the tree...then you're gonna win most grudge races...and he's correct.

What I'm thinking about right now...is my own mortality. I'm a big enuf man to admit that run yesterday...wa s nothing but a blur. I posted a pic of my buddy Mikes 2002 low 10 bronze colored Camaro awhile back...and it has a proper professionally installed cage in it. I'm gonna sit down with him and find out who installed it. It's time I did the same.

4427
General Buick Tech / Re: jason's education thread
« on: October 13 2014, 03:34:33 PM »
Jason...one other thing. If you ever overboost an engine...while you're changing the headgaskets... change the valve springs. If you don't, I promise you the engine won't rev. Ask me how I know.

4428
General Buick Tech / Re: jason's education thread
« on: October 13 2014, 01:05:19 PM »
If you're talking about RPM drop at the shift points at WOT...then I'm seeing a 700 drop on the 1-2 shift and 450ish on the 2-3. That cam is likely all in about 5500...and you crossed the line at 5200. If the engine had of revved out in 3rd...then you would have been in the ballpark for that cam around 5500. You can play with the RPM at the traps with tire height and locking the convertor.

4429
General Buick Tech / Re: jason's education thread
« on: October 13 2014, 08:09:39 AM »
From previous experience I found the 980's soften up pretty quick. This is what I would do...and let's see what the other guys think. I'd run a compression check...and if all's well...then I'd slap a set of 981's on it...and have at 'er. You'd have a coronary if you knew the spring pressure I run with this flat tappet cam. :)

4430
IHADAV8 Playground / Re: New Personal Best 6.72 at 104.67
« on: October 13 2014, 07:42:28 AM »
Congrats. That's moving man.




Thanks so much Jeremy...means a lot coming from you. Always had a ton of respect for what you did with that yellow car.

4431
General Buick Tech / Re: jason's education thread
« on: October 13 2014, 06:49:40 AM »
Jason...how old...or how many passes are on those valve springs?

4432
General Buick Tech / Re: jason's education thread
« on: October 13 2014, 05:38:11 AM »
Jason, I had a look at the file...and the high gear RPM's are really struggling.

4433
General Buick Tech / Re: jason's education thread
« on: October 12 2014, 09:49:28 PM »
Dayum that looks like fun!

4434
General Buick Tech / Re: jason's education thread
« on: October 12 2014, 09:05:43 PM »
Weld 'er up. Stop by your favorite exhaust shop and grab a pair of new studs and nuts.

4435
IHADAV8 Playground / Re: New Personal Best 6.72 at 104.67
« on: October 12 2014, 07:54:08 PM »
On my way! :)

4436
IHADAV8 Playground / Re: New Personal Best 6.72 at 104.67
« on: October 12 2014, 07:53:15 PM »
Warmin' 'em up. :)

4437
IHADAV8 Playground / Re: New Personal Best 6.72 at 104.67
« on: October 12 2014, 07:49:07 PM »
666...the number of the beast. :)

4438
IHADAV8 Playground / New Personal Best 6.72 at 104.67
« on: October 12 2014, 07:46:24 PM »
Went back out today and pulled 4 numbers from low gear fueling and went a full 4 degrees over Erics low gear timing default setting. Cranked out a 6.72 at 104.67 on a 1.58 launch. A big thank you to Steve Wood for helping me over the years.

4439
General Buick Tech / Re: jason's education thread
« on: October 12 2014, 07:39:55 PM »
Nice work Jason!

4440
IHADAV8 Playground / Re: 6.93 at 103.47
« on: October 11 2014, 08:35:09 PM »
I think the converter is too loose and it's not hitting the tires as hard as it should. . That's an opinion and not a fact ☺

I'm always open to opinions...and any help is always greatly appreciated.  :)

Pages: 1 ... 294 295 [296] 297 298 ... 371
SimplePortal 2.3.7 © 2008-2024, SimplePortal