Author Topic: Insanity  (Read 2586 times)

0 Members and 1 Guest are viewing this topic.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6515
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Insanity
« on: November 28 2011, 09:17:36 AM »
....snip....

2008 Malibu-
The steps needed to replace the headlight bulb are as follows:

   1. Open the hood and remove the plastic cover above the radiator (14 screws).
   2. Jack up the car and remove the wheel (five lug nuts).
   3. Remove the wheel-well liner (15 screws and pop-rivets).
 ED: Inner fender?
   
   4. This exposes two bolts that hold the bumper in place; remove these bolts and slide off the end of the bumper.
   5. Now, you can reach the three bolts that hold in the headlight assembly; remove the headlight assembly and replace the bulb.
   6. Replace everything (29 screws, nuts, bolts, and pop-rivets).
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline $1987 GN$

  • Turbo Street Eliminator
  • ******
  • Posts: 1089
  • PSI: 1
    • View Profile
Re: Insanity
« Reply #1 on: November 28 2011, 09:33:17 AM »
7 dollar bulb 70 dollar labour bill nice.

AJ___

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Insanity
« Reply #2 on: November 28 2011, 09:51:55 AM »
I would charge more than that
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Charlief1

  • Just another kinky six
  • Turbo Street Eliminator
  • ******
  • Posts: 1348
  • PSI: 2
    • View Profile
Re: Insanity
« Reply #3 on: November 28 2011, 11:08:11 AM »
You aught to try a damn Jag if you think that's hard. Damn thing took me 2 hours with air tools.
And remember, when dealing with children, silence may be golden but duct tape is silver.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal