Tech Area > A/C, Heating and Cooling

hot cold blend door

(1/2) > >>

Shimy87:
Well this weekend slid the hot/cold lever over to hot. later go to slid it back to cold and feel some resistance then it slides to cold but no cold air :O looks like the cable connects to a v shaped plastic arm that moves the door. Well the plastic V broke where the cable connects. It also appears you need to remove the entire dash to replace that part :013:

Anyone run into this dilema?

Steve Wood:
this arm?

https://vortexbuicks-etc.com/heater_cable.htm

Shimy87:
Hey Steve, yup thats the culprit. I did some research and found the part on a vendor site. Thanks for the info!!

Steve Wood:
lucky that one is an easy fix

daveismissing:
was a much harder fix before the parts became available

Navigation

[0] Message Index

[#] Next page