General > Computer/Tech Support

Trying to get my powerlogger to read boost

<< < (2/2)

good2win22:
Boost signal for power logger must go thru the analog block. In other words, if you tapped the signal wire behind the glove box, that signal wire then goes to the analog block.  I don't remember the position in the block. 5 volts to the sensor.  Check black and grey wire for 5 volts at the sensor mounted to the passenger firewall. You can check the signal voltage by putting a meter on the green wire while the sensor is plugged in with the key on and then grounding your meter to the black wire or somewhere on the chassis. Preferably, the negative side of the battery

Scoobum:
Always a good idea to follow the instructions provided.

http://www.fullthrottletech.com/attachment.php?attachmentid=1057&d=1235006325

Scoobum:
I'm sure you'll find it here.

http://www.fullthrottletech.com/forumdisplay.php?f=75

Navigation

[0] Message Index

[*] Previous page