Author Topic: IAC going down  (Read 2675 times)

0 Members and 1 Guest are viewing this topic.

Offline Tim Hensley

  • Turbo Street Modified
  • *****
  • Posts: 329
  • PSI: 0
  • Boost n00b
    • View Profile
IAC going down
« on: May 18 2020, 12:05:12 AM »
I’ve been chasing the dropping numbers for mounts started  25 down to 20 at first then 15. Spraying carb cleaner with no clear leak.Got all the way down to 9 ,keeps have residue around throttle shaft.
I changed it out with a spear I have. The one I took off has .010 play is that a lot?
Arizona GN109 forged rotating assembly
DLS 210-210
Champion irons
Extreme Auto stage II trans and converter

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: IAC going down
« Reply #1 on: May 18 2020, 12:13:13 AM »
I'm no expert, but that sounds like quite a bit.  You can ask Steve Monroe for a professional opinion :)
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Tim Hensley

  • Turbo Street Modified
  • *****
  • Posts: 329
  • PSI: 0
  • Boost n00b
    • View Profile
Re: IAC going down
« Reply #2 on: May 22 2020, 02:07:14 AM »
Steve got back to me,should I just do a rebuild or do the 62 MM blade ?
Arizona GN109 forged rotating assembly
DLS 210-210
Champion irons
Extreme Auto stage II trans and converter

Offline reality

  • Turbo Street Modified
  • *****
  • Posts: 540
  • PSI: 0
  • Boost n00b
    • View Profile
Re: IAC going down
« Reply #3 on: May 22 2020, 07:03:25 AM »
62 without ? Around 7% more area to flow air.
That's not 7% more air it's 7% more area to flow air/
Or think of it like going from a 58 mm Mikuni to a 62 mm
« Last Edit: May 22 2020, 07:10:19 AM by reality »

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2170
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: IAC going down
« Reply #4 on: May 22 2020, 08:39:27 AM »
I can't see that the money spent on the 62mm upgrade could come close to being cost effective in the performance increase. Everything adds up but for me there are way better ways to spend that coin.
Rich

"Goals without actions are just dreams."

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: IAC going down
« Reply #5 on: May 22 2020, 09:32:22 AM »
Quote from: Tim Hensley
Steve got back to me,should I just do a rebuild or do the 62 MM blade ?

Unless, it's a big difference, I would do both
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Re: IAC going down
« Reply #6 on: May 22 2020, 11:55:01 AM »
I would open it up and let it breathe easier at this point.
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Tim Hensley

  • Turbo Street Modified
  • *****
  • Posts: 329
  • PSI: 0
  • Boost n00b
    • View Profile
Re: IAC going down
« Reply #7 on: May 22 2020, 01:31:16 PM »
The cost is 85 for repairs to the shaft bushing and seals and 135 for complete service and 62 mm.
I think it my be worth the money. Steve has a good reputation.
Car dose run pretty good
Arizona GN109 forged rotating assembly
DLS 210-210
Champion irons
Extreme Auto stage II trans and converter

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: IAC going down
« Reply #8 on: May 22 2020, 01:58:32 PM »
Steve does excellent work for sure
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5549
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Re: IAC going down
« Reply #9 on: May 22 2020, 07:04:10 PM »
Had one of Steves on my car. Throttle response was kick ass!
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal