Author Topic: Best head gaskets and why  (Read 2134 times)

0 Members and 1 Guest are viewing this topic.

Offline Gerry17

  • Bone Stock
  • **
  • Posts: 14
  • PSI: 0
  • Boost n00b
    • View Profile
Best head gaskets and why
« on: July 29 2020, 08:01:50 AM »
109 block .030 over with stock heads

Offline Grumpy

  • Turbo Street Modified
  • *****
  • Posts: 489
  • PSI: 4
    • View Profile
Re: Best head gaskets and why
« Reply #1 on: July 29 2020, 09:32:51 AM »
Stock ones !! Will act like a fuse if ya mess yup.  :cheers:

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Best head gaskets and why
« Reply #2 on: July 29 2020, 10:12:13 AM »
Yes, the stock ones for the cars running in the elevens or slower.  Torque them down in several stages for best success.  Note that the original factory head bolts cannot be reused.  Buy ARP bolts and use them as a replacement.

Here is the number of the stock FelPro replacement  in this link   https://www.weberpowerproducts.com/steel-core-laminate-head-gasket-p/fel-9441pt.htm
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Gerry17

  • Bone Stock
  • **
  • Posts: 14
  • PSI: 0
  • Boost n00b
    • View Profile
Re: Best head gaskets and why
« Reply #3 on: July 30 2020, 11:38:22 AM »
thank you for the info

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5549
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Re: Best head gaskets and why
« Reply #4 on: July 31 2020, 09:55:12 PM »
Felpros quality for head gaskets has gone down the shitter. Check the fire rings...don't be surprised to see them egg shaped. Take 'em back if they are. Victor Reinz are only way to fly.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Best head gaskets and why
« Reply #5 on: August 01 2020, 12:10:50 AM »
Felpro went down the toilet 15 years ago.  VR stopped making them.  Even Weber does not have any left in stock.  Maybe someone does..
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5549
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Re: Best head gaskets and why
« Reply #6 on: August 01 2020, 09:17:30 AM »
I'd say go with RJC shims...but if you miss the tune you take a chance on hurting the bottom end.
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal