Author Topic: Muffler recommendations.  (Read 3857 times)

0 Members and 1 Guest are viewing this topic.

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Muffler recommendations.
« on: June 12 2020, 09:56:23 PM »
Hey guys, currently have pypes 2.5 with race pros. To loud /droney at highway speed for me. Been reading good things about dynomax vt....thoughts . recomendations?
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Muffler recommendations.
« Reply #1 on: June 12 2020, 11:01:40 PM »
I have the ultraflow ss on my GN and the Hooker Maximum Flows on the T.  Both are straight thru types and neither drone.

As far as the VT's, I have never seen or heard them, but, I am sure goggle will come up with something if you include turbo buick in the search term.

For best performance, turbos like as little backpressure as possible.  

Nothing ever droned as badly for me as the original turbo  style mufflers that I installed when the car was new....I  quickly upgraded to the Ultraflows...
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6515
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: Muffler recommendations.
« Reply #2 on: June 13 2020, 10:08:03 AM »
Shimmy Steve is getting older getting older? Noise doesn't seem to have the same fun for me anyways.
The real quiet solution is 3 mufflers, Bob Bailey and a few others have had them custom fabbed
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Re: Muffler recommendations.
« Reply #3 on: June 13 2020, 11:13:16 AM »
I recently changed mine to dual 3" Borla S-Types.  I had the S-Types on my Chevy SS before I sold it and really liked them.  They are straight through design, and are made to be a little on the quiet side with no drone.  The idle sounds good and they really make a wonderful sound at full throttle with the turbo.  Overall I like them.  Cons:  a little pricey but you get what you pay for.
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Muffler recommendations.
« Reply #4 on: June 13 2020, 04:32:15 PM »
Mr. Missing!  I am getting older for sure....but everyone needs some good mufflers, for example:


C'mon down and listen to my challenger!  526 cubes outputted thru two 3" race bullets....Dro ne?  LOL
[/size][/color]
http://www.vortexbuicks-etc.com/Challenger.mp4
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline daveismissing

  • Two Buicks- too little money$$
  • Turbo Street Outlaw
  • *******
  • Posts: 6515
  • PSI: 3
  • Two Buicks- too little money$$
    • View Profile
Re: Muffler recommendations.
« Reply #5 on: June 13 2020, 04:53:42 PM »
Love it! Breaking traction on shift !! Anyways that is way different from the highway steady state drone.
-Drain plug by Earl Brown, custom oil pan by Rich's Auto

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Muffler recommendations.
« Reply #6 on: June 13 2020, 04:57:33 PM »
I cannot tell how much is drone and how much is just plain noise at cruise...It never is quiet enuf to tell the difference. LOL

It looks like it was just starting to hang the rear out right before the shift and it moved violently on the shift...scared my son and he is never afraid.  It has a very stiff Hotchkis suspension so I don't think it shifts weight very well...not sure what the fix is.    255 x 17 Nittos don't provide much bite either...
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Scoobum

  • Turbo Street Outlaw
  • *******
  • Posts: 5549
  • PSI: 3
  • YOU CAN'T HANDLE THE TRUTH!!!!
    • View Profile
Re: Muffler recommendations.
« Reply #7 on: June 13 2020, 05:19:47 PM »
Ya' let yer' foot out of it when it broke loose and it jerked on ya'...ya' big sissy!!! Stay in it and 'saw' on the wheel!! Nice car!!!
Hard work pays off, dreams come true. Bad times don't last, but BAD GUYS do!

RIP Scott Hall AKA Razor Ramon

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Muffler recommendations.
« Reply #8 on: June 13 2020, 05:38:56 PM »
Quote from: Scoobum
Ya' let yer' foot out of it when it broke loose and it jerked on ya'...ya' big sissy!!! Stay in it and 'saw' on the wheel!! Nice car!!!
that is my son and he hardly ever lifts, but those are pretty step ditches on each side of a well crowned country road.  He would have been afraid to come back if he rolled it.. LOL
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Re: Muffler recommendations.
« Reply #9 on: June 13 2020, 08:42:31 PM »
Nice car! Lift to play another day!!  :icon_lol: Sounds good but I'm looking for a quiet cruiser with some bark on acceleration. Think I'm going to try the vt's and report back
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Re: Muffler recommendations.
« Reply #10 on: June 20 2020, 10:12:24 PM »
Couldn't find any ultra flow VTs so I got regular ultra flow, they seem to be constructed exactly like the pypes race pros inside and out. Sound a bit deeper on start up and idle. Have not taken a drive yet so no report on drone or interior sound
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Muffler recommendations.
« Reply #11 on: June 20 2020, 11:34:02 PM »
all the straight thrus are basically the same, but they often vary in sound....  Go drive it! LOL
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Re: Muffler recommendations.
« Reply #12 on: June 21 2020, 05:19:23 PM »
Drove it today, no drone, quieter but still a nice sound. Very happy!!
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Muffler recommendations.
« Reply #13 on: June 21 2020, 06:27:26 PM »
Good deal!  Glad it worked out :)
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline phil_long

  • F47
  • Turbo Street Eliminator
  • ******
  • Posts: 1540
  • PSI: 0
  • ...far from avg
    • View Profile
Re: Muffler recommendations.
« Reply #14 on: June 23 2020, 05:04:58 PM »
We need a vid!

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal