Author Topic: Torque Converter Lock-up speed  (Read 3561 times)

0 Members and 1 Guest are viewing this topic.

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Torque Converter Lock-up speed
« on: March 28 2020, 12:14:00 PM »
I have been driving my car lately after replacing my broken bumper fillers and notice that the torque converter is locking up at 70 mph.  It seems a little high for me driving unless at interstate speeds.  I believe the stock lock up speed is 48 mph.  Does anyone have any opinions for what speed might be best for street driving?
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9882
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Torque Converter Lock-up speed
« Reply #1 on: March 28 2020, 01:36:27 PM »
A bit above where it shifts into of at light throttle. Think mine is set around 45
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Re: Torque Converter Lock-up speed
« Reply #2 on: March 28 2020, 06:46:58 PM »
45 is what Eric's chips are normally set at.  Don't know what I was thinking when I ordered that chip!
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2170
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: Torque Converter Lock-up speed
« Reply #3 on: March 30 2020, 08:36:25 AM »
70 is pretty fast. I would go 55-60mph as that thing locking and unlocking in mid speeds is annoying to me . I just want it to lock once we get cruising on the hwy. 
Rich

"Goals without actions are just dreams."

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal