General > Vendor Info, Steals And Deals!

RPS's new Return Line Upgrade kits!

(1/3) > >>

BoostedRPS:
New Return Line kits from RPS.


For those people who want to upgrade your fuel lines, but don't want to spend $500 on a setup, this return line kit comes with a new -6AN return line and adapter fitting for the pressure regulator.


We all know the stock feed line will take you to the 10s, so if that works for you, this kit was made to save you money by offering ONLY what you NEED.


Installin g this return line, along with making sure the sending unit return line tubes are ported out (if need be) will allow you to run larger fuel pumps on the stock feed lines, along with swapping to an E85 setup if you desire.


Fuel return lines are 16.5 feet ( 16-1/2 )long.
They come with; metric to AN adapter fitting with aluminum crush washer that mounts at the bottom of the stock style fuel pressure regulator. One side of the line has a 90degree fitting on it, and the otherside has a straight -6AN hose end on it.


If you do not have a sending unit that has AN fittings on it, we can remove the straight AN fitting and include worm-gear hose clamps, so that you can slide the nylon hose over the return line hose barb on the sending unit. If you want this done we reduce the cost by $10.


These kits are $150 shipped to the lower 48 states right now. We have 3 more kits available and IN STOCK READY TO SHIP.


KIT DOES NOT COME STANDARD WITH PICTURED FUEL FILTER. PLEASE READ BELOW FOR FURTHER DETAILS.OPTION AL:


New fuel filter (same as pictured) with adapter fittings so that you can install a new E85-compatible fuel filter. These DeatschWerks fuel filters have a 3 year warranty, are 10 micron stainless steel filter elements, and have less than 1 psi of backpressure rise-over 40sq inches of surface area. Fuel filter add-on is $140 SHIPPED to the lower 48 states. All filters are drop-shipped from DeatschWerks to reduce overall costs (by not having to pass on the extra cost to have it shipped to us and then shipped to you).


For questions or orders, please call or text Tyler at 707 362 6030 or email at 1987GN@gmail.com
Thank you,Tyler

good2win22:
Not a bad idea.  I've always heard that you pull fuel through a metal screen and push fuel through a paper filter. Thoughts?

nocooler:
Is the line just a rubber liner or is it synthetic?

BoostedRPS:

--- Quote from: nocooler on August 04 2018, 10:24:22 AM ---Is the line just a rubber liner or is it synthetic?

--- End quote ---

Synthetic.

Braided nylon hose. E-85 compatible


--- Quote from: good2win22 on August 04 2018, 10:16:33 AM ---Not a bad idea.  I've always heard that you pull fuel through a metal screen and push fuel through a paper filter. Thoughts?

--- End quote ---

Not sure what you want in terms of my thoughts. You stated a fact. Not sure where to go from there?

Steve Wood:
I am confused...is the filter option for the return line or is it a replacement for the feed side existing fuel filter....

Then if what Jason stated as a fact, we are pushing thru metal instead of paper?

Seems to be a very attractive price for the return line kit

Navigation

[0] Message Index

[#] Next page