Author Topic: Pratt & Whitney 28 cylinder Radial Engine  (Read 5470 times)

0 Members and 1 Guest are viewing this topic.

Offline stevemon

  • Turbo Street Limited
  • ***
  • Posts: 178
  • PSI: 0
    • View Profile
    • http://www.throttlebodys.com
Pratt & Whitney 28 cylinder Radial Engine
« on: June 11 2012, 11:53:39 AM »


Pratt & Whitney 4360 Wasp engine introduced in 1944. Basically, the engine was 28- cylinder four-row air cooled radial engine. Each row of pistons was slightly offset from the previous, forming a semi-helical arrangement to facilitate efficient airflow cooling of the successive rows of cylinders, with the spiraled cylinder setup inspiring the engine's "corncob" nickname. A mechanical supercharger geared at 6.374:1 ratio to engine speed provided forced induction, while the propeller was geared at 0.375:1 so that the tips did not reach inefficient supersonic speeds. Initially, it developed 3,000 horsepower, later models gave 3,500 horsepower.
            The 4360 powered the B-50,  successor to the B-29 and later the B-36, to name a few. And although reliable in flight, the Wasp Major was maintenance-intensive. Improper starting technique could foul all 56 spark plugs, which would require hours to clean or replace. As with most piston aircraft engines of the era, the time between overhauls of the Wasp Major was about 600 hours when used in commercial service.

http://www.vimeo.com/16117810

(Go to the link below the picture)
2004 Ford Ranger Edge Ext Cab
2009 Toyota Rav4 Sport 4WD, V-6
1986 GN - Sold
1989 TTA #10 - Sold
2006 Itasca Navion Motorhome

Offline Top Speed

  • Don't Tread on Me
  • Turbo Street Outlaw
  • *******
  • Posts: 2548
  • PSI: -2
    • View Profile
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #1 on: June 11 2012, 07:19:50 PM »
Very cool video!  Thanks!
Champion Irons w/T&D roller rockers, TA-61 turbo, 206/206 Comp Cam,  57 lb/hr Siemens Injectors, 3000 stall PTC, PTE Plenum w/RJC Power Plate, 70 mm Accufab Throttle Body, RJC 325 Megacooler, TurboTweak 5.7/ Alky Control w/M1 methanol, 23 psig on the street, Puddn' Power engine, Borla Exhaust

Chris

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #2 on: June 12 2012, 08:29:42 AM »
Those radials were truly works of art....Motormi nd Mike will be trying to put one in his buick pretty soon
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline tb3

  • Turbo Street Eliminator
  • ******
  • Posts: 1447
  • PSI: 2
    • View Profile
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #3 on: June 13 2012, 11:39:43 PM »
super charged and turbocharged! :rock:
 
One of my professors was a flight engineer on the b36. (his flight jacket is on display underneath the b36 at wright patterson af museum.
He had several great stories.
the b36 had 6 of those engines. (plus a pair of jet engines on each wing tip)
I remember him talking about the first time he taxi'd in that thing.  he looked out one of the windows and he swore he could see the concrete under those monster props shaking like it was gonna bust
When I'm in Rome, they do as I do

Offline tb3

  • Turbo Street Eliminator
  • ******
  • Posts: 1447
  • PSI: 2
    • View Profile
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #4 on: June 13 2012, 11:42:12 PM »
or wait, 
was it only supercharged?
maybe I'm thinking of the r985 radial.  some of those where turbo and supercharged.
 
to late to think, lol!  I'll remember later
When I'm in Rome, they do as I do

Offline tb3

  • Turbo Street Eliminator
  • ******
  • Posts: 1447
  • PSI: 2
    • View Profile
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #5 on: June 13 2012, 11:44:31 PM »
dang it stevemon!!!
your gonna make me read the article, aren't you?!!! :091:
 
 
 
 
 
 
 
 
too late!
it was gonna bother me.
 
 
 
 hence the model designation. Initial models developed 3,000 hp (2,240 kW), and later models 3,500 hp, but one model delivered 4,300 hp (3200 kW) using two large turbochargers in addition to the supercharger. Engines weighed 3,482 to 3,870 lb (1,579 to 1,755 kg), giving a power-to-weight ratio of 1.11 hp/lb (1.83 kW/kg), which was matched or exceeded by very few contemporary engines.
Wasp Majors were produced between 1944 and 1955; 18,697 were built.
 
When I'm in Rome, they do as I do

Offline stevemon

  • Turbo Street Limited
  • ***
  • Posts: 178
  • PSI: 0
    • View Profile
    • http://www.throttlebodys.com
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #6 on: June 14 2012, 06:16:10 AM »
My work is through here.  :rofl:
2004 Ford Ranger Edge Ext Cab
2009 Toyota Rav4 Sport 4WD, V-6
1986 GN - Sold
1989 TTA #10 - Sold
2006 Itasca Navion Motorhome

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #7 on: June 14 2012, 09:14:11 AM »
I still remember the image of a B36 that I saw fly over my house when I was about 7.

It has not been that long since some "modern" crop dusters were still using old R1340 engines.   The ground did shake when they flew over while spraying.
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline tb3

  • Turbo Street Eliminator
  • ******
  • Posts: 1447
  • PSI: 2
    • View Profile
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #8 on: July 07 2012, 11:01:26 AM »
I would love to have witnessed a fly over of one of those behemuths.
 
theres a story about a group of volunteers that had one pretty close to being restored to airworthyness condition, but the us govt shut them down.  they where concerned it could get into the hands of a third world country  :rolleyes; :jerkit:
When I'm in Rome, they do as I do

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #9 on: July 08 2012, 05:04:05 PM »
you could put most third world countries inside of one
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

Offline SuperSix

  • Administrator
  • Turbo Street Outlaw
  • *******
  • Posts: 5071
  • PSI: 234
    • View Profile
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #10 on: July 09 2012, 05:10:51 PM »
you could put most third world countries inside of one

Well, the Earth is the 3rd planet from the sun doesn't that make all countries third world?
'87 GN, 60lb, TA49, THDP, FTP cam, T+ lots o' shit - SOLD
'07 Ford F150 Lariat 2WD, 5.4L 3v - 255k
'20 Kubota BX2380. FEL, 60" deck
'78 IH/Case 184 Lo-Boy
'99 Kawasaki Bayou 400 4x4

Offline Steve Wood

  • Turbo Street Outlaw
  • *******
  • Posts: 9893
  • PSI: 34
    • View Profile
    • http://www.vortexbuicks-etc.com/
Re: Pratt & Whitney 28 cylinder Radial Engine
« Reply #11 on: July 09 2012, 06:14:35 PM »
If you still use base10
Steve Wood

http://www.vortexbuicks-etc.com

A lot of broken parts does not make you a racer; it makes you a slow learner.

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal