Author Topic: preparing for paint  (Read 3486 times)

0 Members and 1 Guest are viewing this topic.

Offline shmed

  • Turbo Street Limited
  • ***
  • Posts: 171
  • PSI: 0
    • View Profile
preparing for paint
« on: June 26 2012, 10:02:48 PM »
ok looking at getting the t ready to paint
but dont know where to start
anyone wanna give me starting tips?
the car is brown gonna go white if that helps

Offline Scott87

  • Bone Stock
  • **
  • Posts: 92
  • PSI: 0
  • Boost Tube
    • View Profile
Re: preparing for paint
« Reply #1 on: June 26 2012, 10:31:51 PM »
Remove all trims, all seals... Get an idea for how many window trim clips you will need to replace..  Remove bumpers, remove grill. If a black grill you can spray it with a rattle can of satin black..

With bumpers removed assess the fillers condition..

Posted From Tapatalk

Offline Shimy87

  • Turbo Street Eliminator
  • ******
  • Posts: 1238
  • PSI: 2
    • View Profile
Re: preparing for paint
« Reply #2 on: June 27 2012, 04:56:34 PM »
start by saving alot of $$$$
87 GN, K&N cold air, gutted cat, TT 5.7 chip, AFPR, 340 Walbro w/ hotwire, 60 LBS injectors, 981 valve springs, 206/206 Cam, RJC Powerplate, LS1 MAF & translator, Vacuum brakes, Hellwig rear sway bar, Energy suspension poly bushings, Razors Alky, Pypes exhaust, 5931 turbo, CK9.5 converter

Offline Scott87

  • Bone Stock
  • **
  • Posts: 92
  • PSI: 0
  • Boost Tube
    • View Profile
Re: preparing for paint
« Reply #3 on: June 27 2012, 11:39:32 PM »
If you do allot of the prepping, stripping, taping, general disassembly it should save you quite a bit labor cost for when you send it out to paint..

Posted From Tapatalk

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal