IHADAV8.com - Turbo Buick Tech, and Nonsense
General => IHADAV8 Playground => Topic started by: good2win22 on January 21 2018, 08:13:01 AM
-
Spent part of the day on Friday with my friend Jack building this setup. The lid of the TR6 was drilled and tapped to secure the coils.
-
Clean install...nice work.
-
Does it work?
-
Haven't done any WOT tests. Idle seems smoother and more consistent.
-
Nice. Looks like a pretty nifty setup. Did you make a cardboard template for the mount while you had it apart?
-
Nice. Looks like a pretty nifty setup. Did you make a cardboard template for the mount while you had it apart?
Parts list and template available on request
-
Cool. Estimated cost of what you put in? Worth it over the stock coil?
-
Cool. Estimated cost of what you put in? Worth it over the stock coil?
Coils are the big ticket item at $50 a piece, CNP kit from Bob $40, wires $70 and boots/plugs for coils $24.
I've trashed two coil packs in the last year. Bob over drives the TR6 in waste spark mode to get a decent spark at the plug but it's at the expense of the coil pack. If I could have found a way to mount the IGN1A coils, I would've used them.
-
What vehicle did the coils originally come on? I can be on the hunt at the "recycler".
-
what wires did you use?
I have my coils bolted to the valve covers.
-
What vehicle did the coils originally come on? I can be on the hunt at the "recycler".
2005-2018 LS 6.0
-
what wires did you use?
I have my coils bolted to the valve covers.
I went with Taylor Spiro-pro 8mm. I like the spark plug boots on them. Easy to grab and pull off the plug
-
How much dwell does Bob run? Those coils will autofire @ high rpm with the wrong dwell! I think anything over 4.5ms.
-
How much dwell does Bob run? Those coils will autofire @ high rpm with the wrong dwell! I think anything over 4.5ms.
I have never had a problem with mine been a couple years and I’m not easy on stuff.
My coils were used to got 8 for $100.00 with brackets at the wrecker from a Silverado
Sent from my iPhone using Tapatalk Pro
-
How do the brackets for on the Buick VC? Mods to the brackets? Or the bolt right on?
-
How much dwell does Bob run? Those coils will autofire @ high rpm with the wrong dwell! I think anything over 4.5ms.
From my reading, anything over 6-6.5ms is when the auto discharge kicks in. I will have to confirm but I believe the dwell is is set at 4ms
-
How do the brackets for on the Buick VC? Mods to the brackets? Or the bolt right on?
Rich, I've seen several folks with brackets for the Buick v6 valve covers. All were made just a bit different. If I were going to go that route, I would've probably made something myself. Most folks are proud of their work.
-
Sounds like it’s under control.
-
My brackets were home made I can post pics if you like.
-
I dig your stacked set up.
-
Spoke with Bob directly today. Dwell on the TR6 using CNP is set at 5 ms in the current software