Tech Area > Transmissions
FEL-PRO Transmission Pan Gasket
(1/1)
gnonyx:
Can I apply silicone on pan for this Fel-Pro gasket, or install it dry?
Steve Wood:
I have always installed them dry. If I were using silicone, I would glue the gasket to the transmission instead of the pan.
gnonyx:
--- Quote from: Steve Wood on February 24 2020, 11:31:54 PM ---I have always installed them dry. If I were using silicone, I would glue the gasket to the transmission instead of the pan.
--- End quote ---
Do you used the same gasket type, and if not what brand?
Scoobum:
The gasket you have is fine. No sealer.
Steve Wood:
Not much choice in gaskets for the transmission. Felpro is what I have used. One of these days I will change mine again. They tend to start leaking when the car is not driven much-just like all the other gaskets :D
72-120 lb-inches of torque. I think I used to set my wrench to 100 lb-inches
Navigation
[0] Message Index
Go to full version