Author Topic: Caspers Gen2 Plug and Play Harness  (Read 4404 times)

0 Members and 1 Guest are viewing this topic.

Offline klopsdp

  • Newbie
  • *
  • Posts: 1
  • PSI: 0
  • Boost n00b
    • View Profile
Caspers Gen2 Plug and Play Harness
« on: January 13 2016, 09:10:34 PM »
All the wires of the Gen2 intimidated me into buying Caspers plug and play harness for the Gen2.  Now, I'm stuck.  What has to be done to enable the plug and play harness to be used with a PLK wideband.  Also, is the stock ECM case large enough to accept both the Gen2 and Powerlogger?  Thanks.

Offline TexasT

  • Legend in my own mind
  • Turbo Street Outlaw
  • *******
  • Posts: 2170
  • PSI: 1
  • So, This black car is fast?
    • View Profile
Re: Caspers Gen2 Plug and Play Harness
« Reply #1 on: January 13 2016, 11:12:53 PM »
You probably need to get the instructions and see what the inputs are. I'm guessing the gen2 has some kind of input to hook up a wideband to help it know what is going on. You just have to figure out which wires it is.
Rich

"Goals without actions are just dreams."

Offline larrym

  • Turbo Street Eliminator
  • ******
  • Posts: 1363
  • PSI: 1
    • View Profile
Caspers Gen2 Plug and Play Harness
« Reply #2 on: January 14 2016, 12:01:13 AM »
http://www.fullthrottletech.com/attachment.php?attachmentid=304&d=1151351332

Try this

Here are all the instructions.
http://www.fullthrottletech.com/forumdisplay.php?f=65

You can also hook up a laptop to the Gen ll and log some of the data with tuner pro
86 white T type with t tops and blackout trim. 60lb injectors Gen 2 with Extender Chip TR6 ignition 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Intercooler Cobbled together Alky Injection 4 inch MAF pipe with integral sensor
2800 stall lots of fun with a little 6 banger!
Best ET 11.36

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal